Authorized Skandacor Dealer
Skandacor — Finishing & Packaging
Innovative print finishing and packaging solutions for modern production environments.
Serving South Florida from our Miami headquarters — sales, install, training, and on-site service.
30+
Years Experience
4th Gen
Family Business
1,000+
Machines Serviced
11
Brand Partners
The Skandacor Lineup
We help South Florida operations choose, install, and run the right Skandacor machine for their volume and workflow.
Skandacor
Skandacor Bagel DigiFav B2 Industrial Simplex Laminator
The Bagel DigiFav B2 is a compact industrial single-side laminator built for offset and digital B2 work, running sheets up to 20.8x29.5 inches at up to 72 ft/min (4,320 12x18 sheets per hour). A pneumatic air-suction feeder with 23.6 inch stack height and 440 lb capacity keeps it fed, a thermal-oil sealed heating roller holds consistent temperature, and high-speed bursting with a micro-perf wheel separates sheets automatically. SLEEKpro foil, table jogger, and pallet stacker modules are available.
View Details
Skandacor
Skandacor Bagel DigiFav B2 Pro High-Speed Simplex Laminator
The Bagel DigiFav B2 Pro is the high-speed version of the DigiFav B2, laminating B2 sheets at up to 98 ft/min - 5,880 12x18 sheets per hour - with a larger heating system, advanced miss-feed recovery, and a stronger decurling system. The pneumatic air-suction feeder holds a 23.6 inch, 440 lb pile, film rolls up to 18 inches cut changeover downtime, and SLEEKpro foiling is supported with the optional module.
View Details
Skandacor
Skandacor Bagel DigiFav B3 DS Double-Sided Laminator
The Bagel DigiFav B3 DS laminates B3 sheets on both sides in a single pass at up to 65 ft/min, using oil-heated rollers for consistent temperature, lower energy draw, and longer roller life. The pneumatic feeder with two air-suction units carries a 400 mm pile, sheets are separated by a bursting roller system with pneumatic micro-perforator and industrial cooling, and SLEEKpro metallic, clear, and hologram finishes are supported. It runs on 230 V single phase.
View Details
Skandacor
Skandacor Bagel DigiFav B3 Simplex Industrial Laminator
The Bagel DigiFav B3 is a single-sided industrial laminator for B3 digital print work, with a fully automatic feeder, bursting sheet separation, and support for thin-gauge films under 2.0 mil. It handles sheets from 8.5x11 up to 14x27.5 inches and adds SLEEKpro digital foil transfer with the optional module, slotting between the compact MiniLam B3 and the larger B2-format DigiFav machines.
View Details
Skandacor
Skandacor Bagel DigiFav DS B2 Simplex/Duplex Laminator
The Bagel DigiFav DS laminates both sides of a B2 sheet in one pass at up to 82 ft/min, halving traditional duplex lamination times. Oil-heated rollers hold consistent temperatures while cutting energy use and extending roller life, the pneumatic air-suction feeder carries a 23.6 inch, 440 lb pile, and high-speed bursting separates sheets automatically. It also supports SLEEKpro metallic, clear, and hologram finishes.
View Details
Skandacor
Skandacor Bagel Falcon B1 Fully Automatic Industrial Laminator
The Bagel Falcon B1 is Skandacor's flagship industrial laminator, running B1 sheets up to 29.5x41.3 inches at up to 115 ft/min - 4,140 20x28 sheets per hour. Pallet loading and unloading with a 31.5 inch, 1,102 lb feeder pile minimizes downtime, a thermal-oil sealed heating roller and double mechanical decurling bar keep output flat, and high-speed bursting separates sheets automatically. Options include a SLEEKpro foil module, double film changer, and crane film-loading assist.
View Details
Skandacor
Skandacor Bagel Foiler 3D Auto Raised-Foil System
The Bagel Foiler 3D Auto applies metallic and holographic foil to raised UV varnish, uncoated papers, and other hard-to-foil surfaces - taking digital embellishment into the third dimension. A unique roller configuration with oil-filled, sealed heating and pressure rollers foils varnish layers up to 80 microns at 33 ft/min, while an anti-scratch decurling bar keeps prints clean and a fully automatic pneumatic feeder with 11.8 inch stack keeps production moving.
View Details
Skandacor
Skandacor Bagel Foiler 3D Semi-Auto Raised-Foil System
The Bagel Foiler 3D Semi-Auto delivers the same oil-heated raised-foil capability as the Foiler 3D line - metallic and holographic effects over UV varnish up to 80 microns - with a semi-automatic feeder for shops with shorter runs. It handles sheets up to 15x27.5 inches and 130-350 gsm at up to 33 ft/min, with high-precision temperature sensors and self-regulating pressure up to 101 N per linear mm, on a 230 V single-phase circuit.
View Details
Skandacor
Skandacor Bagel Foiler B3 Auto Digital Foiling System
The Bagel Foiler B3 Auto applies digital foil over toner for medium- to large-scale production at up to 33 ft/min, with a fully automatic deep-pile pneumatic feeder so one operator can run continuous jobs. Its oil-heated system with high-precision temperature sensors and a self-regulating pressure unit (up to 101 N per linear mm) delivers consistent foiling on sheets up to 15x27.5 inches and 130-350 gsm, all on a 220-240 V single-phase circuit.
View Details
Skandacor
Skandacor Bagel Foiler B3 Semi-Auto Digital Foiling System
The Bagel Foiler B3 Semi-Auto brings oil-heated digital foiling over toner to shops that don't need automatic feeding, running sheets up to 15x27.5 inches at 27 ft/min with a semi-automatic feeder. High-precision temperature sensors and a self-regulating pressure system up to 101 N per linear mm produce consistent metallic, clear, and holographic finishes over varnish layers up to 80 microns, on a 230 V single-phase circuit.
View Details
Skandacor
Skandacor Bagel iLam Pro B3 Semi-Auto Simplex Laminator
The Bagel iLam Pro B3 is the hand-fed entry point to Skandacor's industrial B3 lamination line. A semi-automatic infeed gate system gives precise sheet overlap without a pneumatic feeder, bursting separation splits the laminated web, and films under 2.0 mil are supported. SLEEKpro digital foil transfer is available as an option, making it a lower-cost route into single-side lamination and foiling for digital print shops.
View Details
Skandacor
Skandacor BAGEL MiniLam B3 Compact Auto Laminator
The Bagel Systems MiniLam B3 is a compact fully automatic single-side laminator built for demanding digital print environments. A pneumatic air suction feeder with a 15.75 inch stack height keeps production moving at speeds up to 49 ft/min with high speed bursting separation. Modular options add duplex lamination, a SLEEKpro foil module, and an ultra fast double film changer.
View Details
Skandacor
Skandacor DURApro OmniCut 350 Digital Sheet-Fed Cutter
The DURApro OmniCut 350 is an automatic sheet feeding and cutting system built around a Graphtec CE7000-40 plotter, loading, cutting, and stacking sheets without operator intervention. The feeder averages 150 sheets, an integrated sensor reads registration marks in a fraction of a second for 0.3 mm cut precision, and the included Cutting Manager software handles die-cut, kiss-cut, perforation, and creasing from vector PDFs. At 77 lb, it is a desktop-scale route into automated sticker and small-box production.
View Details
Skandacor
Skandacor DuraTRIM 30" Automatic Laminate Trimmer
The DuraTRIM 30 is a high-speed automatic trimmer and sheeter that cuts laminated webs from 3 to 30 inches wide at over 70 ft/min. A fiber-optic smart sensor reads the sheet edge and fires a flying knife with cut accuracy to a thousandth of an inch, while dancing speed-adjusting feed technology keeps the web flowing steadily. Servo drive, touch screen control, and a sheet counter come standard on a 120 V circuit, in a bench-top 90 lb frame.
View Details
Skandacor
Skandacor EasyCutter 550 Laminate Trimmer & Sheeter
The EasyCutter 550 is a compact automatic trimmer for sheeting duplex-laminated output, with a 21.6 inch cutting width and automatic adjustment of cutting length, speed, and margin - with or without encapsulation borders. A dancer bar regulates web speed, a touch screen and safety shield keep it simple and safe to run, and its 35x20 inch footprint on a 115 V outlet fits behind any small-format duplex laminator.
View Details
Skandacor
Skandacor FINISHpro 1523 AF Digital Die Cutter
The FINISHpro 1523 AF is an auto-feeding flatbed digital die cutter with a 15x23 inch cutting area - a die-free way to produce business cards, shaped cards, labels, stickers, tags, and small packaging in short runs. A registration camera on the cutting head reads printed marks for 0.1 mm accuracy, the auto feeder holds a 4.5 inch pile (about 400 sheets of 250 gsm), and cutting, creasing, and kiss-cut tools run at up to 1,500 mm/s on stocks up to 350 gsm.
View Details
Skandacor
Skandacor FINISHpro 1523 AF Max Digital Die Cutter
The FINISHpro 1523 AF Max adds an oscillating tool to the auto-feeding 15x23 inch flatbed platform, extending die-free cutting to substrates up to 6 mm thick - foam board, corrugated plastic and board, and heavy card stocks. Camera registration holds 0.1 mm accuracy at speeds to 1,500 mm/s, the feeder carries a 4.5 inch pile, and the standard universal cutter, creasing wheel, and kiss-cut tools are all included.
View Details
Skandacor
Skandacor FINISHpro 2029 AF Max Digital Die Cutter
The FINISHpro 2029 AF Max brings the auto-feeding AF Max flatbed platform to a 20x29 inch cutting area, covering full 20x29 press sheets for die-free short-run packaging, signage blanks, and stickers. The oscillating tool cuts substrates up to 6 mm, camera registration holds 0.1 mm accuracy at up to 1,500 mm/s, and the 4.5 inch auto feeder keeps roughly 400 sheets running unattended.
View Details
Skandacor
Skandacor FINISHpro 2739 AF Max Digital Die Cutter
The FINISHpro 2739 AF Max is a large-format flatbed die cutting system with a 39x28 inch area and a five-position tool head: four fixed holders carry 0.9 and 1.5 mm drag knives, a creasing wheel, and an oscillating tool, while a general-purpose holder takes the tool of your choice. It cuts substrates to 10 mm (16 mm with the optional EOT tool) at up to 1,200 mm/s with 0.1 mm camera-registered accuracy, and the integrated PC accepts PDF and EPS along with standard cut formats.
View Details
Skandacor
Skandacor FINISHpro 3547 AF Max Digital Die Cutter
The FINISHpro 3547 AF Max is the 47x35 inch member of the AF Max flatbed die cutting family, sized for B1 sheets and large signage blanks. Its five-position head combines four fixed tools - 0.9 and 1.5 mm drag knives, a 1 mm creasing wheel, and an oscillating tool - with a general-purpose holder, cutting substrates to 10 mm (16 mm with the optional EOT tool) at up to 1,200 mm/s. Camera registration keeps every cut within 0.1 mm of the print.
View Details
Skandacor
Skandacor FINISHpro 3D 1623 Spot UV Printer
The FINISHpro 3D 1623 is a spot varnish UV inkjet printer that adds raised textures, tactile details, and high-gloss effects to printed sheets up to 23.6x16.5 inches. A CCD camera registration system aligns each sheet to within 0.2 mm, varnish builds from 40 up to 500 microns at 720x720 dpi, and a 12x18 sheet finishes in about 40 seconds. The auto feeder holds roughly 700 sheets of 250 gsm, and an integrated PC, software, and workstation are included - Skandacor positions it as the first inkjet embellishment press under $70K.
View Details
Skandacor
Skandacor FINISHpro 3D 2436 Large-Format Spot UV Printer
The FINISHpro 3D 2436 scales spot UV embellishment to sheets up to 36.2x24.4 inches, adding raised textures and gloss effects with automatic paper loading and unloading. CCD camera registration keeps alignment within 0.2 mm, varnish builds to 500 microns at 720x720 dpi, and an A3 job completes in about 40 seconds. The integrated PC, software, and workstation are included, bringing B2+ format digital embellishment in-house.
View Details
Skandacor
Skandacor FINISHpro 4735 AF Max Digital Die Cutter
The FINISHpro 4735 AF Max is a heavy-duty A0-format flatbed cutting system with a 47x35.4 inch work area and two universal cutting modules that handle cutting, V-cutting, creasing, kiss-cutting, and even milling with a 450 W spindle option. It cuts substrates up to 19 mm thick at 1,200 mm/s with 0.1 mm accuracy, feeds from a 15.7 inch, 573 lb pile, and accepts a wide format list including AI, PDF, EPS, and DXF. Options include a touch PC, roll device, automatic knife initialization, and air compressor.
View Details
Skandacor
Skandacor FINISHpro DX 1531 Case Maker & Sheet Duplexer
The FINISHpro DX 1531 is an automatic case making and sheet duplexing machine for medium-scale book manufacturers, producing hardcover cases up to 15.7x31.5 inches at up to 5 pieces per minute with a single operator. Automatic feeding, positioning, and anti-skew technology align boards, center strips, and cover sheets, while the hot-melt gluing station self-cleans and job changeovers between sheet sizes are fully automatic. An optional finished-case stacker with foldable trolley streamlines handling.
View Details
Skandacor
Skandacor FINISHpro Electric 16.9" Guillotine Cutter
The FINISHpro Electric Guillotine cuts a full ream in one pass with a 16.9 inch cut width, 17 inch depth, and 1.77 inch clamp height - powered by an electric blade drive and electric clamping for smooth, consistent cuts. An optical cutting line shows exactly where the blade lands, guards on the front and rear tables interlock so the blade cannot drop while open, and the resharpenable blade and stand are included. A fit for small print shops, schools, and copy centers on light production work.
View Details
Skandacor
Skandacor FINISHpro FC-500VC Flatbed Digital Die Cutter
The FINISHpro FC-500VC is an entry-level flatbed digital die cutter that cuts and creases 19x26 inch sheets up to 600 gsm with two independent tools - no cutting dies required. A vacuum pump holds material flat, camera registration and QR-code job recognition keep longer jobs efficient, and the bundled SignCut Pro2 software (with Illustrator and CorelDraw plugins) places registration marks automatically. It runs on any 100-240 V outlet in a 39x38 inch footprint.
View Details
Skandacor
Skandacor FINISHpro FC-700VC Flatbed Digital Die Cutter
The FINISHpro FC-700VC scales the FC-series flatbed cutter to a 31x42.7 inch effective area - two B2 sheets or a full B1 sheet at once. Two 600 gf tool positions cut, kiss-cut, perforate, and crease, a high-resolution camera reads registration marks as small as 5 mm (four marks in under 3 seconds) even on transparent media, and QR codes match print and cut files automatically. Vacuum hold-down, a 4.3 inch touch screen, and USB, U-disk, and Ethernet interfaces round out the package on a standard 100-240 V outlet.
View Details
Skandacor
Skandacor FINISHpro Manual 18.7" Guillotine Cutter
The FINISHpro Manual Guillotine is a cost-effective ream cutter with an 18.7 inch cut width, 19.1 inch depth, and a 3.15 inch clamp opening. A wheel-driven clamp adds stack pressure, the cushion-ended steel hand lever gives a smooth even cut, and a front hand crank positions the back gauge while the optical cut line and micro-adjustable blade keep cuts accurate. Safety shields front and rear interlock the blade, and the resharpenable blade, cutting stick, and stand are included.
View Details
Skandacor
Skandacor FINISHpro RDA 1420 Automatic Rotary Die Cutter
The FINISHpro RDA 1420 is a high-speed rotary die cutter that runs 5,000 sheets per hour using cost-effective flexible dies - far outpacing clamshell and digital flatbed machines on long runs. It handles sheets up to 14.5x20.5 inches and 106-450 gsm, ideal for web-to-print template work like round-corner business cards and playing cards, with a 9 inch loading table, exit conveyor, and color touchscreen for one-operator production.
View Details
Skandacor
Skandacor FINISHpro SC-350 Sheet-Fed Digital Cutter
The FINISHpro SC-350 is a sheet-fed digital cutter built for automatic kiss-cut sticker and label production. A friction feeder pulls sheets up to 13.7x19.6 inches and 350 gsm, camera registration aligns each cut to the print, and QR codes load the right job per sheet - so every sheet in the stack can be different. It cuts at up to 1,200 mm/s with bundled SignCut Pro2 software, handles limited through-cutting, and plugs into a standard outlet.
View Details
Skandacor
Skandacor LAMpro Bobcat S15M Compact Laminator & SLEEKpro Foiler
The LAMpro Bobcat S15M is a 15 inch hot roll laminator with a heated chrome roller, making it one of the most capable compact machines for SLEEKpro digital foiling and single-sided lamination with thin films. It runs films from 1.0 to 5.0 mil at up to 15 ft/min, handles 120-400 gsm stocks, and includes a decurler bar, perforator for manual sheet separation, and a take-up roller for foil or liner rewinding. At 122 lb on a standard 115 V outlet, it fits on-demand print shops, schools, and offices.
View Details
Skandacor
Skandacor LAMpro Cheetah S15 Photo Laminator & Photo Finisher
The LAMpro Cheetah S15 Photo lets digital printers replace the silver-halide photo process with chemical-free embossed lamination, cutting photo production costs by up to 40% while keeping the look, feel, and weight of traditional prints. It laminates at 39 ft/min, runs PHOTOpro emboss lamination at 20 ft/min and SLEEKpro foiling at 16 ft/min, and separates sheets with a flying knife. A liquid chiller for the emboss roller and an on-board air compressor are included.
View Details
Skandacor
Skandacor LAMpro Cheetah S15 Single Side Laminator
The LAMpro Cheetah S15 is a compact single-sided laminator and specialty finishing system designed for on-demand print shops. Its semi-automatic feeder suits short runs, while the flying knife separator cleanly cuts tough films like nylon and thin PET at speeds up to 39 ft/min. It also supports SLEEKpro finishing for variable data foil stamping, spot varnish, and holographic effects.
View Details
Skandacor
Skandacor LAMpro Jaguar D22A Duplex Laminator
The LAMpro Jaguar D22A is a heavy-duty duplex hot roll laminator that runs encapsulation and double-sided lamination at up to 49 ft/min on sheets to 20.4x29.5 inches. A detachable feeder with side-lay registration table switches between automatic and semi-automatic feeding, air-shaft mandrels speed film changeovers, and preheat plus heated nip rollers improve adhesion to digital prints. Side slitters with scrap take-up reels and six banks of cooling fans finish the web before offline sheeting.
View Details
Skandacor
Skandacor LAMpro Jaguar D30 High-Speed Duplex Laminator
The LAMpro Jaguar D30 brings the Jaguar duplex platform to a 30 inch web, running encapsulation and double-sided lamination at up to 49 ft/min with a side-lay registration table for precise hand feeding. Air-shaft mandrels make film changeovers fast, preheat and heated nip rollers boost adhesion to digital prints, and side slitters with scrap take-up reels plus six banks of cooling fans condition the web before offline sheeting.
View Details
Skandacor
Skandacor LAMpro Lion 22A Simplex/Duplex Laminator & SLEEKpro
The LAMpro Lion 22A does every type of lamination on one machine: duplex encapsulation, thin-gauge duplex, single-sided lamination, and SLEEKpro digital foiling - including foil over raised UV. A dual heated nip system improves adhesion to digital prints, the automated feeder holds a 13.7 inch pile, and a flying knife separates single-sided output at up to 49 ft/min (duplex runs to 40 ft/min). Card manufacturers and commercial shops get one 1,261 lb platform instead of three machines.
View Details
Skandacor
Skandacor LAMpro Panther D47HR 47" Wide-Format Laminator
The LAMpro Panther D47HR is a 47 inch hot roll laminator and mounter for wide-format print finishing. Large rubber nip rollers encapsulate media up to 13 mm thick, side slitters trim the laminated output, and a rear cross cutter with foot pedal handles sheet separation. A take-up roller rewinds slit scrap during encapsulation or the liner during cold PSpro lamination, and the stand with casters is included.
View Details
Skandacor
Skandacor LAMpro Panther D65HR 65" Wide-Format Laminator
The LAMpro Panther D65HR extends the Panther wide-format platform to a 64.5 inch laminating width for full-size signs, posters, and display graphics. Large rubber nip rollers encapsulate media up to 13 mm, side slitters and a rear cross cutter with foot pedal trim and separate output, and a take-up roller rewinds slit scrap or cold-lamination liner. It ships with stand and casters and runs on 220-240 V.
View Details
Skandacor
Skandacor LAMpro Puma D28M 28" Hot Roll Laminator
The LAMpro Puma D28M is a 28 inch hot roll laminator and mounter for small-format print finishing on a standard 115 V outlet. Large rubber nip rollers encapsulate duplex laminate up to 5 mil on media up to 13 mm thick, built-in side slitters trim the output, and a take-up roller supports limited SLEEKpro foiling, scrap rewinding, and cold PSpro liner take-up. Stand and casters are included on the 176 lb unit.
View Details
Skandacor
Skandacor LAMpro Tiger T22W Roll-to-Sheet Industrial Laminator
The LAMpro Tiger T22W is a roll-fed industrial laminator, cutter, and re-stacker that runs at up to 65 m/min (about 213 ft/min) - an order of magnitude faster than sheet-fed machines. Three supply mandrels laminate printed top and bottom webs to a core material up to 488 gsm with optical-eye alignment, dual induction and infrared heating, and a flying guillotine that sheets output up to 27 inches long into a 19 inch stacker. Built for thick cards, flexible packaging, and book covers.
View Details
Skandacor
Skandacor MaxCut Rotary Trimmer (26"-78")
The MaxCut is a cost-effective manual rotary trimmer available in 26, 38, 59, and 78 inch cutting widths for signs, posters, laminated pieces, and other printed media up to 1.0 mm thick. Its self-sharpening stainless steel blade cuts in both directions and rides inside a protective housing, while the gridded work surface, transparent clamp strip, and lockable backstop keep repeat cuts fast and accurate. The 38, 59, and 78 inch models include a stand and waste catch tray.
View Details
Skandacor
Skandacor PODTopic 380 Auto Single-Side Laminator
The PODTopic 380 Auto is a compact single-sided laminator and specialty finishing system with a deep-pile fully automatic feeding head, built for on-demand print shops. Its flying knife cleanly separates NYpro nylon and other hard-to-burst films at 32 ft/min simplex, an adjustable decurling system keeps output flat, and SLEEKpro finishing adds variable-data foil stamping, spot varnish, and holographic effects at 16 ft/min. Dual infrared heating brings it to temperature in 5 minutes.
View Details
Skandacor
Skandacor PODTopic 380F Single-Side Laminator
The PODTopic 380F is the semi-automatic, hand-fed version of the PODTopic single-side laminator, running at 39 ft/min with a flying knife that cleanly separates NYpro nylon and other hard-to-burst films. It takes sheets from 7x8.25 inches up to 15 inches wide - up to 48 inches long with the optional extension - and supports SLEEKpro variable-data foil, spot varnish, and holographic finishing. Dual infrared heating warms up in 5 minutes on a 220-240 V circuit.
View Details
Skandacor
Skandacor proLINE T22 Industrial Trimmer
The proLINE T22 is a high-speed industrial trimmer that sheets and trims laminated webs up to 22 inches wide at 118 ft/min - about 3,700 12x18 sheets per hour in portrait trim mode. A PLC color touchscreen configures trim and sheet modes, a dancer bar keeps web tension stable for continuous production, and the auxiliary exit table is included. It runs on 110 V, making it an easy add behind any duplex laminator.
View Details
Skandacor
Skandacor proLINE T22 Max Trimmer with Vibrating Exit Table
The proLINE T22 Max is the fully featured version of the 22 inch proLINE trimmer, adding a fiber-optic mark mode for up to 10 registered cuts per sheet, waste trim fans, an ionizing exit fan, a rolling waste bin, and an integrated vibrating/jogging exit table that squares output as it stacks. It sheets laminated webs at 118 ft/min - about 3,700 12x18 sheets per hour - with PLC touchscreen control and dancer-bar web tension on a 230 V circuit.
View Details
Skandacor
Skandacor proLINE T32 Industrial Trimmer
The proLINE T32 widens the proLINE trimmer platform to a 32 inch web for larger-format laminated output, sheeting at up to 118 ft/min - about 3,500 12x18 sheets per hour in portrait trim mode. Trim and sheet modes are set on the PLC color touchscreen, a dancer bar keeps tension stable in continuous production, and the auxiliary exit table is included, all on a 110 V circuit.
View Details
Skandacor
Skandacor proLINE T32 Max Trimmer with Vibrating Exit Table
The proLINE T32 Max is the flagship of the proLINE trimmer series: a 32 inch web trimmer with fiber-optic mark mode for up to 10 registered cuts per sheet, waste trim fans, an ionizing exit fan, a rolling waste bin, and an integrated vibrating exit table that jogs sheets square as they stack. It runs laminated webs at 118 ft/min - about 3,500 12x18 sheets per hour - with PLC touchscreen control on a 230 V circuit.
View Details
Skandacor
Skandacor Q-Cutter 800A 31.5" Auto Lamination Trimmer
The Q-Cutter 800A is a commercial automatic cutter and sheeter for laminated webs up to 31.5 inches wide, using a microprocessor for precise cutting of PET, PVC, OPP, and nylon films from 1.2 to 10 mil. Trim position is fully adjustable with or without encapsulation borders, throughput reaches 25 A5 or 20 A2 sheets per minute, and the intuitive control panel means anyone can run it - all on a standard 115 V outlet.
View DetailsWhy Buy From PressTech
We're not a middleman or an online storefront. PressTech is a hands-on equipment dealer backed by four generations of print industry experience.
Authorized Dealer
Factory-authorized for every brand we carry. Genuine parts, certified technicians, and full manufacturer warranty on all equipment.
30+ Years in Business
4th-generation, family-owned dealer serving the print industry since 1991. Deep expertise in matching the right equipment to your workflow.
Same-Day Service
Our own service technicians respond fast when you need them. On-site repairs, preventive maintenance plans, and emergency support across South Florida.
Delivery & Installation
Professional delivery, installation, and hands-on operator training included with every equipment purchase. We don’t just sell it — we set it up and make sure your team is ready.
Buy or Lease
Flexible financing through our leasing partners. Get the equipment you need today with monthly payments that fit your budget.
Nationwide Shipping
Based in Miami and shipping coast to coast. Local service in South Florida, remote support and parts delivery anywhere in the U.S.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Over these many years you have handled all my requests from repairs, supplies, sales of equipment... at a fair and competitive price.”
Dan M.
Baptist Health South Florida — In-House Print Shop
Skandacor — Common Questions
Request a Skandacor Quote
Tell us what you're trying to accomplish and we'll put together a configuration and pricing for the Skandacor that fits your workflow.
Or call us directly: 786-916-3713
South Florida's authorized Skandacor dealer.
Free consultations. Local install. On-site service. Buy or lease through a family-owned dealer with 30+ years in the business.