Request a QuoteSkandacor LAMpro Jaguar D30 High-Speed Duplex Laminator
Model: 1S11JD30
The LAMpro Jaguar D30 brings the Jaguar duplex platform to a 30 inch web, running encapsulation and double-sided lamination at up to 49 ft/min with a side-lay registration table for precise hand feeding. Air-shaft mandrels make film changeovers fast, preheat and heated nip rollers boost adhesion to digital prints, and side slitters with scrap take-up reels plus six banks of cooling fans condition the web before offline sheeting.
Request a Quote
Specifications
| Max Web Width | 30" |
|---|---|
| Min Sheet Size | 2x6" |
| Speed | Up to 49 ft/min (depending on application) |
| Stock Weight | 120 - 400 gsm |
| Max Film Roll Diameter | 14.9" (3" core, air shafts) |
| Heating | Infrared heater with preheat and heated nip rollers; 10 minute warm-up |
| Trimming | Side slitters included; auxiliary sheeter/trimmer sold separately |
| Electrical | 220-240 V, 40 A, 1 Ph |
| Dimensions / Weight | 83x44x62", 2,013 lb |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Requires a 220-240 V, 40 A single-phase circuit.
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
Skandacor
Skandacor LAMpro Jaguar D22A Duplex Laminator
The LAMpro Jaguar D22A is a heavy-duty duplex hot roll laminator that runs encapsulation and double-sided lamination at up to 49 ft/min on sheets to 20.4x29.5 inches. A detachable feeder with side-lay registration table switches between automatic and semi-automatic feeding, air-shaft mandrels speed film changeovers, and preheat plus heated nip rollers improve adhesion to digital prints. Side slitters with scrap take-up reels and six banks of cooling fans finish the web before offline sheeting.
View Details
Skandacor
Skandacor LAMpro Lion 22A Simplex/Duplex Laminator & SLEEKpro
The LAMpro Lion 22A does every type of lamination on one machine: duplex encapsulation, thin-gauge duplex, single-sided lamination, and SLEEKpro digital foiling - including foil over raised UV. A dual heated nip system improves adhesion to digital prints, the automated feeder holds a 13.7 inch pile, and a flying knife separates single-sided output at up to 49 ft/min (duplex runs to 40 ft/min). Card manufacturers and commercial shops get one 1,261 lb platform instead of three machines.
View Details
Skandacor
Skandacor Q-Cutter 800A 31.5" Auto Lamination Trimmer
The Q-Cutter 800A is a commercial automatic cutter and sheeter for laminated webs up to 31.5 inches wide, using a microprocessor for precise cutting of PET, PVC, OPP, and nylon films from 1.2 to 10 mil. Trim position is fully adjustable with or without encapsulation borders, throughput reaches 25 A5 or 20 A2 sheets per minute, and the intuitive control panel means anyone can run it - all on a standard 115 V outlet.
View Details
CutWorx
CutWorx CWT 1016 Advantage Flatbed Applicator Table
The CWT 1016 Advantage is the smallest CWT applicator table, giving sign shops a 4'5" x 3'1" working area for laminating, transfer-taping, and mounting yard signs, posters, and street signs. Like all CWT flatbed applicators it positions material precisely for far less waste than a roll laminator, and most operators are productive within an hour. It arrives fully assembled - roll it out of the crate and into the shop.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative