Request a QuoteSkandacor DuraTRIM 30" Automatic Laminate Trimmer
Model: 3K100030
The DuraTRIM 30 is a high-speed automatic trimmer and sheeter that cuts laminated webs from 3 to 30 inches wide at over 70 ft/min. A fiber-optic smart sensor reads the sheet edge and fires a flying knife with cut accuracy to a thousandth of an inch, while dancing speed-adjusting feed technology keeps the web flowing steadily. Servo drive, touch screen control, and a sheet counter come standard on a 120 V circuit, in a bench-top 90 lb frame.
Request a Quote
Specifications
| Cut Width | 3" up to 30" |
|---|---|
| Speed | Up to 75 ft/min blade speed |
| Max Cutting Thickness | 0.8 mm |
| Laminating Film | 1.2 - 15 mil |
| Cutting | Flying knife with fiber-optic edge sensor; accuracy to 0.001" |
| Controls | Touch screen, sheet counter, error fault menu |
| Option | Registration mark reading sensors |
| Electrical | 120 V, 10 A |
| Dimensions / Weight | 54x13.25x16.25", 90 lb |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Runs on a standard 120 V outlet (10 A).
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
Skandacor
Skandacor EasyCutter 550 Laminate Trimmer & Sheeter
The EasyCutter 550 is a compact automatic trimmer for sheeting duplex-laminated output, with a 21.6 inch cutting width and automatic adjustment of cutting length, speed, and margin - with or without encapsulation borders. A dancer bar regulates web speed, a touch screen and safety shield keep it simple and safe to run, and its 35x20 inch footprint on a 115 V outlet fits behind any small-format duplex laminator.
View Details
Skandacor
Skandacor Q-Cutter 800A 31.5" Auto Lamination Trimmer
The Q-Cutter 800A is a commercial automatic cutter and sheeter for laminated webs up to 31.5 inches wide, using a microprocessor for precise cutting of PET, PVC, OPP, and nylon films from 1.2 to 10 mil. Trim position is fully adjustable with or without encapsulation borders, throughput reaches 25 A5 or 20 A2 sheets per minute, and the intuitive control panel means anyone can run it - all on a standard 115 V outlet.
View Details
Skandacor
Skandacor LAMpro Lion 22A Simplex/Duplex Laminator & SLEEKpro
The LAMpro Lion 22A does every type of lamination on one machine: duplex encapsulation, thin-gauge duplex, single-sided lamination, and SLEEKpro digital foiling - including foil over raised UV. A dual heated nip system improves adhesion to digital prints, the automated feeder holds a 13.7 inch pile, and a flying knife separates single-sided output at up to 49 ft/min (duplex runs to 40 ft/min). Card manufacturers and commercial shops get one 1,261 lb platform instead of three machines.
View Details
Challenge
Challenge CHAMP 150 Hydraulic Paper Cutter
The Challenge CHAMP 150 is billed by the manufacturer as the strongest 15" paper cutter on the market: full hydraulic power drives both the clamp and the knife with up to 2,350 lbs of pressure, ideal for high volumes and thick stocks in small formats. Its narrow welded-steel frame rolls through a 29" doorway, and it plugs into a standard 120 V, 20 A outlet. Made in the USA.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative