Request a QuoteSkandacor Bagel DigiFav DS B2 Simplex/Duplex Laminator
Model: 1B035301
The Bagel DigiFav DS laminates both sides of a B2 sheet in one pass at up to 82 ft/min, halving traditional duplex lamination times. Oil-heated rollers hold consistent temperatures while cutting energy use and extending roller life, the pneumatic air-suction feeder carries a 23.6 inch, 440 lb pile, and high-speed bursting separates sheets automatically. It also supports SLEEKpro metallic, clear, and hologram finishes.
Request a Quote
Specifications
| Sheet Size | 8.6x8.6" min to 20.8x29.5" max |
|---|---|
| Speed | Simplex and duplex up to 82 ft/min |
| Film Thickness | 1.0 - 2.0 mil |
| Max Film Roll Diameter | Upper 21"; lower 14.25" |
| Paper Weight | 120 - 400 gsm (depending on application) |
| Feeder | Pneumatic air suction with transport conveyor, 4 frontal stops, 23.6" stack height, 440 lb capacity |
| Sheet Separation | High-speed bursting with micro-perf wheel |
| Electrical | 220-240 V, 50 A, 3 Phase |
| Dimensions / Weight | 115"L x 46"W, 2,200 lb |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Requires a 220-240 V, 50 A three-phase supply.
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
Skandacor
Skandacor Bagel DigiFav B2 Industrial Simplex Laminator
The Bagel DigiFav B2 is a compact industrial single-side laminator built for offset and digital B2 work, running sheets up to 20.8x29.5 inches at up to 72 ft/min (4,320 12x18 sheets per hour). A pneumatic air-suction feeder with 23.6 inch stack height and 440 lb capacity keeps it fed, a thermal-oil sealed heating roller holds consistent temperature, and high-speed bursting with a micro-perf wheel separates sheets automatically. SLEEKpro foil, table jogger, and pallet stacker modules are available.
View Details
Skandacor
Skandacor Bagel DigiFav B3 DS Double-Sided Laminator
The Bagel DigiFav B3 DS laminates B3 sheets on both sides in a single pass at up to 65 ft/min, using oil-heated rollers for consistent temperature, lower energy draw, and longer roller life. The pneumatic feeder with two air-suction units carries a 400 mm pile, sheets are separated by a bursting roller system with pneumatic micro-perforator and industrial cooling, and SLEEKpro metallic, clear, and hologram finishes are supported. It runs on 230 V single phase.
View Details
Skandacor
Skandacor LAMpro Lion 22A Simplex/Duplex Laminator & SLEEKpro
The LAMpro Lion 22A does every type of lamination on one machine: duplex encapsulation, thin-gauge duplex, single-sided lamination, and SLEEKpro digital foiling - including foil over raised UV. A dual heated nip system improves adhesion to digital prints, the automated feeder holds a 13.7 inch pile, and a flying knife separates single-sided output at up to 49 ft/min (duplex runs to 40 ft/min). Card manufacturers and commercial shops get one 1,261 lb platform instead of three machines.
View Details
CutWorx
CutWorx CWT 1016 Advantage Flatbed Applicator Table
The CWT 1016 Advantage is the smallest CWT applicator table, giving sign shops a 4'5" x 3'1" working area for laminating, transfer-taping, and mounting yard signs, posters, and street signs. Like all CWT flatbed applicators it positions material precisely for far less waste than a roll laminator, and most operators are productive within an hour. It arrives fully assembled - roll it out of the crate and into the shop.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative