Spot UV & Coating
Digital spot UV and raised coating systems that add premium tactile effects to digital print.
30+
Years Experience
4th Gen
Family Business
1,000+
Machines Serviced
11
Brand Partners
Duplo
Duplo DFL-200 Xpress Foil
The Duplo DFL-200 Xpress Foil is desktop digital sleeking made easy: it bonds metallic foil to printed toner at 15 letter sheets per minute, turning everyday digital prints into premium foiled pieces with no dies, plates, or outsourcing. At 42 pounds with a simple friction-fed ADF, it's built for small print shops, franchises, and one-off or personalized short runs — foil first, then overprint CMYK or send straight to finishing.
View Details
Duplo
Duplo DFL-500 Dry Coat/Foil/Laminator
The Duplo DFL-500 is three embellishment machines in one: it dry coats (a clean-up-free alternative to flood UV), foils over printed toner, and thermally laminates gloss, matte, or soft-touch films — all through one ceramic heat roller with an air-suction feeder for unattended runs. Auto film slitting and a flying-knife separator deliver flush-cut sheets from both OPP and PET films, with a dust remover and de-curler standard.
View Details
Duplo
Duplo DFL-700 Foil/Laminator
The Duplo DFL-700 is a production 2-in-1 embellisher: it foils at up to 40 sheets per minute — toner-reactive foil for metallic finishes, or polymer foil over spot UV for raised effects with no stamping dies — and single-side laminates gloss, matte, or soft-touch film at 20 sheets per minute. An air-suction belt feeder, touch-panel pressure and air adjustments, and built-in cooling fans make it a fit for short runs and variable-data work up to 400 gsm.
View Details
Duplo
Duplo DuSense DDC-8000 Raised Spot UV Coater
The DuSense DDC-8000 applies raised spot UV embellishment digitally on press sheets up to 23" x 42" and 600 gsm, using 600x600 inkjet technology, UV lamp curing, and camera registration accurate to 0.2 mm. No dies or screens are required, and the optional Cold Foil Inline Unit adds metallic, holographic, and matte foils in the same pass without lamination. It is the B2 format answer for shops adding high-margin packaging, book jackets, and premium collateral.
View Details
Duplo
Duplo DuSense DDC-810 PRO Raised Spot UV Coater
The DuSense DDC-810 PRO puts raised spot UV embellishment in-house with no screens or dies: 600x600 dpi inkjet heads lay down 15-80 micron tactile varnish, cured by UV lamp and registered by camera to ±0.2 mm. It coats offset or digital output up to 14.33" x 29.52" and 450 gsm at up to 60 letter-length sheets per minute — premium business cards, packaging, invitations, and book covers that sell themselves by touch.
View Details
Duplo
Duplo Ultra 200 PRO UV Coater
The Duplo Ultra 200 PRO applies smear-free flood UV coating — high gloss, satin, or matte — at 66 to 112 feet per minute on stocks from 170 to 500 gsm. Its three-roller coating system with auto-gap rollers prevents flat spots between sheets, the infrared heater cures difficult digital stocks, and the standard SF-300 suction feeder keeps mid-to-high-volume direct mail, book covers, and marketing collateral running unattended.
View Details
Duplo
Duplo Ultra 300Ai/300A UV Coater
The Duplo Ultra 300 is the production model in the Ultra flood-coating line, running smear-free gloss, satin, or matte UV at up to 148 feet per minute. It comes two ways: the Ultra 300Ai with an adjustable bridge unit that takes sheets in-line directly from a digital press, or the Ultra 300A with the SF-300 suction feeder for near-line finishing — either way protecting and enriching digital output up to 20" x 28" and 350 gsm.
View Details
MBM
MBM FoilGlazer II Laminator & Foil Fuser
The FoilGlazer II combines single-sided lamination and sleeking-style foil fusing in one compact machine: run any color foil over black toner to add metallic embellishment to digital short runs, or laminate sheets up to 14.37x23.62" at 16.4 ft/min. The automatic air-suction feeder handles 110-400 gsm stocks with a 2" stack capacity, and automatic film cutting means the operator can walk away once a job starts. It takes standard digital-print, soft-touch, and anti-scuff films on 1" or 3" cores.
View Details
Skandacor
Skandacor Bagel Foiler 3D Auto Raised-Foil System
The Bagel Foiler 3D Auto applies metallic and holographic foil to raised UV varnish, uncoated papers, and other hard-to-foil surfaces - taking digital embellishment into the third dimension. A unique roller configuration with oil-filled, sealed heating and pressure rollers foils varnish layers up to 80 microns at 33 ft/min, while an anti-scratch decurling bar keeps prints clean and a fully automatic pneumatic feeder with 11.8 inch stack keeps production moving.
View Details
Skandacor
Skandacor Bagel Foiler 3D Semi-Auto Raised-Foil System
The Bagel Foiler 3D Semi-Auto delivers the same oil-heated raised-foil capability as the Foiler 3D line - metallic and holographic effects over UV varnish up to 80 microns - with a semi-automatic feeder for shops with shorter runs. It handles sheets up to 15x27.5 inches and 130-350 gsm at up to 33 ft/min, with high-precision temperature sensors and self-regulating pressure up to 101 N per linear mm, on a 230 V single-phase circuit.
View Details
Skandacor
Skandacor Bagel Foiler B3 Auto Digital Foiling System
The Bagel Foiler B3 Auto applies digital foil over toner for medium- to large-scale production at up to 33 ft/min, with a fully automatic deep-pile pneumatic feeder so one operator can run continuous jobs. Its oil-heated system with high-precision temperature sensors and a self-regulating pressure unit (up to 101 N per linear mm) delivers consistent foiling on sheets up to 15x27.5 inches and 130-350 gsm, all on a 220-240 V single-phase circuit.
View Details
Skandacor
Skandacor Bagel Foiler B3 Semi-Auto Digital Foiling System
The Bagel Foiler B3 Semi-Auto brings oil-heated digital foiling over toner to shops that don't need automatic feeding, running sheets up to 15x27.5 inches at 27 ft/min with a semi-automatic feeder. High-precision temperature sensors and a self-regulating pressure system up to 101 N per linear mm produce consistent metallic, clear, and holographic finishes over varnish layers up to 80 microns, on a 230 V single-phase circuit.
View Details
Skandacor
Skandacor FINISHpro 3D 1623 Spot UV Printer
The FINISHpro 3D 1623 is a spot varnish UV inkjet printer that adds raised textures, tactile details, and high-gloss effects to printed sheets up to 23.6x16.5 inches. A CCD camera registration system aligns each sheet to within 0.2 mm, varnish builds from 40 up to 500 microns at 720x720 dpi, and a 12x18 sheet finishes in about 40 seconds. The auto feeder holds roughly 700 sheets of 250 gsm, and an integrated PC, software, and workstation are included - Skandacor positions it as the first inkjet embellishment press under $70K.
View Details
Skandacor
Skandacor FINISHpro 3D 2436 Large-Format Spot UV Printer
The FINISHpro 3D 2436 scales spot UV embellishment to sheets up to 36.2x24.4 inches, adding raised textures and gloss effects with automatic paper loading and unloading. CCD camera registration keeps alignment within 0.2 mm, varnish builds to 500 microns at 720x720 dpi, and an A3 job completes in about 40 seconds. The integrated PC, software, and workstation are included, bringing B2+ format digital embellishment in-house.
View DetailsNot sure which machine fits your shop?
Tell us about your volume and workflow and we'll recommend the right spot uv & coating option, with pricing and financing.
Or call us directly: 786-916-3713