Request a QuoteSkandacor LAMpro Panther D47HR 47" Wide-Format Laminator
Model: 1S29D120HR
The LAMpro Panther D47HR is a 47 inch hot roll laminator and mounter for wide-format print finishing. Large rubber nip rollers encapsulate media up to 13 mm thick, side slitters trim the laminated output, and a rear cross cutter with foot pedal handles sheet separation. A take-up roller rewinds slit scrap during encapsulation or the liner during cold PSpro lamination, and the stand with casters is included.
Request a Quote
Specifications
| Max Laminating Width | 47.2" |
|---|---|
| Media Thickness | Up to 13 mm |
| Speed | Up to 10.8 ft/min |
| Temperature Control | 0 - 150 C (heating roller with internal heater, 4 rollers) |
| Decurling | Yes |
| Warm-Up Time | 10 minutes |
| Cutting | Side slitters and rear cross cutter; foot pedal control |
| Electrical | AC 220-240 V |
| Dimensions / Weight | 58x18x11" (machine), 254 lb; stand with casters included |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Requires a 220-240 V outlet.
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
Skandacor
Skandacor LAMpro Panther D65HR 65" Wide-Format Laminator
The LAMpro Panther D65HR extends the Panther wide-format platform to a 64.5 inch laminating width for full-size signs, posters, and display graphics. Large rubber nip rollers encapsulate media up to 13 mm, side slitters and a rear cross cutter with foot pedal trim and separate output, and a take-up roller rewinds slit scrap or cold-lamination liner. It ships with stand and casters and runs on 220-240 V.
View Details
Skandacor
Skandacor LAMpro Puma D28M 28" Hot Roll Laminator
The LAMpro Puma D28M is a 28 inch hot roll laminator and mounter for small-format print finishing on a standard 115 V outlet. Large rubber nip rollers encapsulate duplex laminate up to 5 mil on media up to 13 mm thick, built-in side slitters trim the output, and a take-up roller supports limited SLEEKpro foiling, scrap rewinding, and cold PSpro liner take-up. Stand and casters are included on the 176 lb unit.
View Details
Skandacor
Skandacor MaxCut Rotary Trimmer (26"-78")
The MaxCut is a cost-effective manual rotary trimmer available in 26, 38, 59, and 78 inch cutting widths for signs, posters, laminated pieces, and other printed media up to 1.0 mm thick. Its self-sharpening stainless steel blade cuts in both directions and rides inside a protective housing, while the gridded work surface, transparent clamp strip, and lockable backstop keep repeat cuts fast and accurate. The 38, 59, and 78 inch models include a stand and waste catch tray.
View Details
CutWorx
CutWorx CWT 1016 Advantage Flatbed Applicator Table
The CWT 1016 Advantage is the smallest CWT applicator table, giving sign shops a 4'5" x 3'1" working area for laminating, transfer-taping, and mounting yard signs, posters, and street signs. Like all CWT flatbed applicators it positions material precisely for far less waste than a roll laminator, and most operators are productive within an hour. It arrives fully assembled - roll it out of the crate and into the shop.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative