Laminators
Single-side and thermal laminating systems for digital print, packaging, and document finishing.
30+
Years Experience
4th Gen
Family Business
1,000+
Machines Serviced
11
Brand Partners
CutWorx
CutWorx CWT 1016 Advantage Flatbed Applicator Table
The CWT 1016 Advantage is the smallest CWT applicator table, giving sign shops a 4'5" x 3'1" working area for laminating, transfer-taping, and mounting yard signs, posters, and street signs. Like all CWT flatbed applicators it positions material precisely for far less waste than a roll laminator, and most operators are productive within an hour. It arrives fully assembled - roll it out of the crate and into the shop.
View Details
CutWorx
CutWorx CWT 1428 Advantage Flatbed Applicator Table
The CWT 1428 Advantage is an affordable 4x8-foot flatbed applicator work table for applying transfer tape, mounting, and laminating graphics with up to 85% quicker workflow than hand methods. Precise flat positioning means less waste than a conventional roll laminator, and most operators master it within an hour. Its modular design ships in a compact package that fits through normal doors.
View Details
CutWorx
CutWorx CWT 1730 Premium Flatbed Applicator Table
The CWT 1730 Premium is a Swedish-built flatbed cut work table that gives sign and print shops a large glass work surface for application, trimming, and finishing. Its 8 foot 8 inch by 5 foot 5 inch working area handles full rolls and rigid substrates up to 2.7 inches thick, with roll holders and a glide beam keeping material flat and square. Casters, side pockets, and a silent compressor with shelf round out a station built for all-day production work.
View Details
CutWorx
CutWorx CWT 1736 Advantage Flatbed Applicator Table
The CWT 1736 Advantage is a 5x10-foot flatbed applicator that brings full-size flatbed lamination and application to shops with smaller budgets or tighter spaces. The 11-foot working length handles full sheets and long banners for signs, posters, and road signs, with the precise positioning and low waste CWT tables are known for. It ships in a compact modular package that fits through standard doors.
View Details
CutWorx
CutWorx CWT 1736 Flatbed Applicator Table
The CWT 1736 is a Swedish-built pneumatic flatbed applicator and work table with a 10'6" x 5'5" working area for laminating, mounting, and application work on full 5x10 sheets. The glide-beam roller applies film and transfer tape over substrates up to 70 mm thick, with roll holders, side pockets, casters, and a silent compressor included. It comes in Premium trim (adds bed-end roll holder, illuminated glass top, and electronic height adjustment) and value Classic trim.
View Details
CutWorx
CutWorx CWT 1740 Flatbed Applicator Table
The CWT 1740 is a Swedish-built pneumatic flatbed applicator with an 11'7" x 5'5" working area - a step up from the 1736 for shops that regularly laminate and mount longer panels and banner runs. The glide-beam roller handles substrates up to 70 mm thick, with roll holders, side pockets, casters, and a silent compressor included. Premium trim adds a bed-end roll holder plus optional illuminated top and electronic height adjustment; Classic trim covers the essentials.
View Details
CutWorx
CutWorx CWT 1747 Flatbed Applicator Table
The CWT 1747 is the longest 1700-series CWT applicator table, with a full 14-foot by 5'5" working area for oversized panels, fleet graphics, and long banner and wallpaper runs. The pneumatic glide-beam roller applies film and transfer tape over substrates up to 70 mm thick, with roll holders, side pockets, casters, and a silent compressor included. Premium trim (CWT1747-02) adds a bed-end roll holder; Classic trim (CWT174710) covers the essentials at a lower price.
View Details
CutWorx
CutWorx CWT 2147 Premium Flatbed Applicator Table
The CWT 2147 Premium is the maximum-format CWT flatbed applicator: a 15'5" x 7' illuminated glass worktable built for oversized media and uninterrupted production shifts. The self-healing cutting mat, leg-mount roll holder, and glide-beam roller handle full rolls and rigid substrates up to 70 mm thick, with up to 80% faster workflow than a traditional roll laminator. It ships modular and compact enough to pass through standard doors, and includes a silent compressor, long-reach cutter knife, and sticky roller kit.
View Details
Duplo
Duplo DFL-200 Xpress Foil
The Duplo DFL-200 Xpress Foil is desktop digital sleeking made easy: it bonds metallic foil to printed toner at 15 letter sheets per minute, turning everyday digital prints into premium foiled pieces with no dies, plates, or outsourcing. At 42 pounds with a simple friction-fed ADF, it's built for small print shops, franchises, and one-off or personalized short runs — foil first, then overprint CMYK or send straight to finishing.
View Details
Duplo
Duplo DFL-500 Dry Coat/Foil/Laminator
The Duplo DFL-500 is three embellishment machines in one: it dry coats (a clean-up-free alternative to flood UV), foils over printed toner, and thermally laminates gloss, matte, or soft-touch films — all through one ceramic heat roller with an air-suction feeder for unattended runs. Auto film slitting and a flying-knife separator deliver flush-cut sheets from both OPP and PET films, with a dust remover and de-curler standard.
View Details
Duplo
Duplo DFL-700 Foil/Laminator
The Duplo DFL-700 is a production 2-in-1 embellisher: it foils at up to 40 sheets per minute — toner-reactive foil for metallic finishes, or polymer foil over spot UV for raised effects with no stamping dies — and single-side laminates gloss, matte, or soft-touch film at 20 sheets per minute. An air-suction belt feeder, touch-panel pressure and air adjustments, and built-in cooling fans make it a fit for short runs and variable-data work up to 400 gsm.
View Details
Formax
Formax FlashGuard 13R10 Heavy-Duty Pouch Laminator
The fastest of the 13" FlashGuard line, the 13R10 runs pouches up to 14 mil at up to 141" per minute through a 10-roller system (6 heated, 2 cooling, 2 output) for consistent, bubble-free lamination on items up to 3mm thick. Built with an all-metal, cool-touch housing and a graphics-based LCD panel with 2 job memories, it suits print shops, large school systems, and universities with steady daily volume. Hot and cold modes plus a 3 mil pouch starter pack are standard.
View Details
Formax
Formax FlashGuard 13R6 Heavy-Duty Pouch Laminator
The FlashGuard 13R6 laminates pouches up to 13" wide and 14 mil thick at up to 55" per minute, using a 6-roller system (4 heating, 2 cooling) for bubble-free results on items up to 3mm thick. The all-metal, cool-touch housing and graphics-based LCD panel with 2 job memories make it a reliable daily workhorse for print shops, schools, and offices. Hot and cold laminating modes are standard, and a 3 mil pouch starter pack is included.
View Details
Formax
Formax FlashGuard 13R8 Heavy-Duty Pouch Laminator
The FlashGuard 13R8 steps up to an 8-roller system (6 heating, 2 cooling) to laminate pouches up to 13" wide and 14 mil thick at up to 82" per minute — roughly 50% faster than the 13R6. The all-metal, cool-touch housing, graphics-based LCD panel with 2 job memories, and hot/cold modes make it a solid mid-volume choice for print shops, schools, and busy offices. A 3 mil pouch starter pack is included.
View Details
Formax
Formax FlashGuard 18R6 Wide-Format Pouch Laminator
The FlashGuard 18R6 brings the FlashGuard line's heavy-duty 6-roller system (4 heating, 2 cooling) to an 18" infeed — wide enough for menus, maps, charts, and other large-format pieces. It handles pouches up to 14 mil and items up to 3mm thick at up to 47" per minute, with an all-metal cool-touch housing, hot/cold modes, and a graphics-based LCD panel that stores 2 custom jobs. A 3 mil pouch starter pack is included.
View Details
Martin Yale
Martin Yale Dry Lam HLA-2301 Automatic Laminator
The Dry Lam HLA-2301 is a fully automatic desktop laminator built for professional environments where speed and consistency matter. It feeds up to 200 sheets automatically, laminates single or double sided at 68 inches per minute, and trims each piece with flush cut or border cut modes. A mobile cart, telescoping catch tray, and waste bin are included.
View Details
MBM
MBM FoilGlazer II Laminator & Foil Fuser
The FoilGlazer II combines single-sided lamination and sleeking-style foil fusing in one compact machine: run any color foil over black toner to add metallic embellishment to digital short runs, or laminate sheets up to 14.37x23.62" at 16.4 ft/min. The automatic air-suction feeder handles 110-400 gsm stocks with a 2" stack capacity, and automatic film cutting means the operator can walk away once a job starts. It takes standard digital-print, soft-touch, and anti-scuff films on 1" or 3" cores.
View Details
Skandacor
Skandacor Bagel DigiFav B2 Industrial Simplex Laminator
The Bagel DigiFav B2 is a compact industrial single-side laminator built for offset and digital B2 work, running sheets up to 20.8x29.5 inches at up to 72 ft/min (4,320 12x18 sheets per hour). A pneumatic air-suction feeder with 23.6 inch stack height and 440 lb capacity keeps it fed, a thermal-oil sealed heating roller holds consistent temperature, and high-speed bursting with a micro-perf wheel separates sheets automatically. SLEEKpro foil, table jogger, and pallet stacker modules are available.
View Details
Skandacor
Skandacor Bagel DigiFav B2 Pro High-Speed Simplex Laminator
The Bagel DigiFav B2 Pro is the high-speed version of the DigiFav B2, laminating B2 sheets at up to 98 ft/min - 5,880 12x18 sheets per hour - with a larger heating system, advanced miss-feed recovery, and a stronger decurling system. The pneumatic air-suction feeder holds a 23.6 inch, 440 lb pile, film rolls up to 18 inches cut changeover downtime, and SLEEKpro foiling is supported with the optional module.
View Details
Skandacor
Skandacor Bagel DigiFav B3 DS Double-Sided Laminator
The Bagel DigiFav B3 DS laminates B3 sheets on both sides in a single pass at up to 65 ft/min, using oil-heated rollers for consistent temperature, lower energy draw, and longer roller life. The pneumatic feeder with two air-suction units carries a 400 mm pile, sheets are separated by a bursting roller system with pneumatic micro-perforator and industrial cooling, and SLEEKpro metallic, clear, and hologram finishes are supported. It runs on 230 V single phase.
View Details
Skandacor
Skandacor Bagel DigiFav B3 Simplex Industrial Laminator
The Bagel DigiFav B3 is a single-sided industrial laminator for B3 digital print work, with a fully automatic feeder, bursting sheet separation, and support for thin-gauge films under 2.0 mil. It handles sheets from 8.5x11 up to 14x27.5 inches and adds SLEEKpro digital foil transfer with the optional module, slotting between the compact MiniLam B3 and the larger B2-format DigiFav machines.
View Details
Skandacor
Skandacor Bagel DigiFav DS B2 Simplex/Duplex Laminator
The Bagel DigiFav DS laminates both sides of a B2 sheet in one pass at up to 82 ft/min, halving traditional duplex lamination times. Oil-heated rollers hold consistent temperatures while cutting energy use and extending roller life, the pneumatic air-suction feeder carries a 23.6 inch, 440 lb pile, and high-speed bursting separates sheets automatically. It also supports SLEEKpro metallic, clear, and hologram finishes.
View Details
Skandacor
Skandacor Bagel Falcon B1 Fully Automatic Industrial Laminator
The Bagel Falcon B1 is Skandacor's flagship industrial laminator, running B1 sheets up to 29.5x41.3 inches at up to 115 ft/min - 4,140 20x28 sheets per hour. Pallet loading and unloading with a 31.5 inch, 1,102 lb feeder pile minimizes downtime, a thermal-oil sealed heating roller and double mechanical decurling bar keep output flat, and high-speed bursting separates sheets automatically. Options include a SLEEKpro foil module, double film changer, and crane film-loading assist.
View Details
Skandacor
Skandacor Bagel iLam Pro B3 Semi-Auto Simplex Laminator
The Bagel iLam Pro B3 is the hand-fed entry point to Skandacor's industrial B3 lamination line. A semi-automatic infeed gate system gives precise sheet overlap without a pneumatic feeder, bursting separation splits the laminated web, and films under 2.0 mil are supported. SLEEKpro digital foil transfer is available as an option, making it a lower-cost route into single-side lamination and foiling for digital print shops.
View Details
Skandacor
Skandacor BAGEL MiniLam B3 Compact Auto Laminator
The Bagel Systems MiniLam B3 is a compact fully automatic single-side laminator built for demanding digital print environments. A pneumatic air suction feeder with a 15.75 inch stack height keeps production moving at speeds up to 49 ft/min with high speed bursting separation. Modular options add duplex lamination, a SLEEKpro foil module, and an ultra fast double film changer.
View Details
Skandacor
Skandacor LAMpro Bobcat S15M Compact Laminator & SLEEKpro Foiler
The LAMpro Bobcat S15M is a 15 inch hot roll laminator with a heated chrome roller, making it one of the most capable compact machines for SLEEKpro digital foiling and single-sided lamination with thin films. It runs films from 1.0 to 5.0 mil at up to 15 ft/min, handles 120-400 gsm stocks, and includes a decurler bar, perforator for manual sheet separation, and a take-up roller for foil or liner rewinding. At 122 lb on a standard 115 V outlet, it fits on-demand print shops, schools, and offices.
View Details
Skandacor
Skandacor LAMpro Cheetah S15 Photo Laminator & Photo Finisher
The LAMpro Cheetah S15 Photo lets digital printers replace the silver-halide photo process with chemical-free embossed lamination, cutting photo production costs by up to 40% while keeping the look, feel, and weight of traditional prints. It laminates at 39 ft/min, runs PHOTOpro emboss lamination at 20 ft/min and SLEEKpro foiling at 16 ft/min, and separates sheets with a flying knife. A liquid chiller for the emboss roller and an on-board air compressor are included.
View Details
Skandacor
Skandacor LAMpro Cheetah S15 Single Side Laminator
The LAMpro Cheetah S15 is a compact single-sided laminator and specialty finishing system designed for on-demand print shops. Its semi-automatic feeder suits short runs, while the flying knife separator cleanly cuts tough films like nylon and thin PET at speeds up to 39 ft/min. It also supports SLEEKpro finishing for variable data foil stamping, spot varnish, and holographic effects.
View Details
Skandacor
Skandacor LAMpro Jaguar D22A Duplex Laminator
The LAMpro Jaguar D22A is a heavy-duty duplex hot roll laminator that runs encapsulation and double-sided lamination at up to 49 ft/min on sheets to 20.4x29.5 inches. A detachable feeder with side-lay registration table switches between automatic and semi-automatic feeding, air-shaft mandrels speed film changeovers, and preheat plus heated nip rollers improve adhesion to digital prints. Side slitters with scrap take-up reels and six banks of cooling fans finish the web before offline sheeting.
View Details
Skandacor
Skandacor LAMpro Jaguar D30 High-Speed Duplex Laminator
The LAMpro Jaguar D30 brings the Jaguar duplex platform to a 30 inch web, running encapsulation and double-sided lamination at up to 49 ft/min with a side-lay registration table for precise hand feeding. Air-shaft mandrels make film changeovers fast, preheat and heated nip rollers boost adhesion to digital prints, and side slitters with scrap take-up reels plus six banks of cooling fans condition the web before offline sheeting.
View Details
Skandacor
Skandacor LAMpro Lion 22A Simplex/Duplex Laminator & SLEEKpro
The LAMpro Lion 22A does every type of lamination on one machine: duplex encapsulation, thin-gauge duplex, single-sided lamination, and SLEEKpro digital foiling - including foil over raised UV. A dual heated nip system improves adhesion to digital prints, the automated feeder holds a 13.7 inch pile, and a flying knife separates single-sided output at up to 49 ft/min (duplex runs to 40 ft/min). Card manufacturers and commercial shops get one 1,261 lb platform instead of three machines.
View Details
Skandacor
Skandacor LAMpro Panther D47HR 47" Wide-Format Laminator
The LAMpro Panther D47HR is a 47 inch hot roll laminator and mounter for wide-format print finishing. Large rubber nip rollers encapsulate media up to 13 mm thick, side slitters trim the laminated output, and a rear cross cutter with foot pedal handles sheet separation. A take-up roller rewinds slit scrap during encapsulation or the liner during cold PSpro lamination, and the stand with casters is included.
View Details
Skandacor
Skandacor LAMpro Panther D65HR 65" Wide-Format Laminator
The LAMpro Panther D65HR extends the Panther wide-format platform to a 64.5 inch laminating width for full-size signs, posters, and display graphics. Large rubber nip rollers encapsulate media up to 13 mm, side slitters and a rear cross cutter with foot pedal trim and separate output, and a take-up roller rewinds slit scrap or cold-lamination liner. It ships with stand and casters and runs on 220-240 V.
View Details
Skandacor
Skandacor LAMpro Puma D28M 28" Hot Roll Laminator
The LAMpro Puma D28M is a 28 inch hot roll laminator and mounter for small-format print finishing on a standard 115 V outlet. Large rubber nip rollers encapsulate duplex laminate up to 5 mil on media up to 13 mm thick, built-in side slitters trim the output, and a take-up roller supports limited SLEEKpro foiling, scrap rewinding, and cold PSpro liner take-up. Stand and casters are included on the 176 lb unit.
View Details
Skandacor
Skandacor LAMpro Tiger T22W Roll-to-Sheet Industrial Laminator
The LAMpro Tiger T22W is a roll-fed industrial laminator, cutter, and re-stacker that runs at up to 65 m/min (about 213 ft/min) - an order of magnitude faster than sheet-fed machines. Three supply mandrels laminate printed top and bottom webs to a core material up to 488 gsm with optical-eye alignment, dual induction and infrared heating, and a flying guillotine that sheets output up to 27 inches long into a 19 inch stacker. Built for thick cards, flexible packaging, and book covers.
View Details
Skandacor
Skandacor PODTopic 380 Auto Single-Side Laminator
The PODTopic 380 Auto is a compact single-sided laminator and specialty finishing system with a deep-pile fully automatic feeding head, built for on-demand print shops. Its flying knife cleanly separates NYpro nylon and other hard-to-burst films at 32 ft/min simplex, an adjustable decurling system keeps output flat, and SLEEKpro finishing adds variable-data foil stamping, spot varnish, and holographic effects at 16 ft/min. Dual infrared heating brings it to temperature in 5 minutes.
View Details
Skandacor
Skandacor PODTopic 380F Single-Side Laminator
The PODTopic 380F is the semi-automatic, hand-fed version of the PODTopic single-side laminator, running at 39 ft/min with a flying knife that cleanly separates NYpro nylon and other hard-to-burst films. It takes sheets from 7x8.25 inches up to 15 inches wide - up to 48 inches long with the optional extension - and supports SLEEKpro variable-data foil, spot varnish, and holographic finishing. Dual infrared heating warms up in 5 minutes on a 220-240 V circuit.
View DetailsNot sure which machine fits your shop?
Tell us about your volume and workflow and we'll recommend the right laminators option, with pricing and financing.
Or call us directly: 786-916-3713