Skip to content

For Copy Shops, Quick Printers & Small Print Shops / South Florida

Finish it in your own shop. Cards, brochures, booklets, done.

Your press or copier prints the sheet. The money is in what happens next: cut, creased, folded, stitched, laminated and boxed for the customer at the counter. Three bundles sized to how busy your shop is, installed on your floor and serviced by our own technicians across South Florida.

Book a Free Demo

What You Finish

The printing is the easy part. Finishing is where the day goes.

Most of a small shop's work is the same handful of jobs, over and over: cards, folded pieces, booklets and anything that needs to survive being handled. Each bundle is built around those jobs.

  1. Business cards, postcards, rack cards and invitations

    Today
    Printed many-up, then cut down on the guillotine one stack and one turn at a time, with the gutters and bleeds measured by eye.
    With the right equipment
    A slitter/cutter/creaser takes the printed sheet and delivers finished cards in one pass: up to 6 slits, 30 cuts and 20 creases a sheet on the DC-618, on stock from 110 to 400 gsm.
  2. Brochures, menus, flyers and letters

    Today
    Folded by hand for short runs, or on a small friction folder that needs resetting for every job.
    With the right equipment
    An automatic tabletop folder sets its own fold plates and remembers the job. The DF-999A folds letter sheets at up to 260 a minute and stores 30 custom jobs.
  3. Booklets, programs, catalogs and newsletters

    Today
    Collated on the bench, stapled with a long-reach stapler and folded by hand, or sent out and marked up.
    With the right equipment
    A booklet maker staples on the spine and folds in one pass. The tabletop iBooklet takes up to 16 sheets a set at up to 800 booklets an hour; the Duplo systems add a sheet feeder and covers up to 300 gsm.
  4. Heavy covers, greeting cards and folded cards on coated stock

    Today
    Toner cracks along the fold, so the job gets scored by hand or the customer gets a cracked spine.
    With the right equipment
    The crease goes in before the fold. The slitter/cutter/creasers crease as they cut, and the CF375 XPRO in Bundle 3 creases and folds 80 to 400 gsm in a single pass.
  5. Laminated menus, covers, signs and counter cards

    Today
    Run through a pouch laminator one piece at a time, or turned away.
    With the right equipment
    A roll laminator finishes 15-inch-wide sheets one or two sided on stock from 120 to 400 gsm, and the same machine lays digital foil over toner for the jobs that need to stand out.
  6. Trimming stacks, cutting down parent sheets, squaring pads and books

    Today
    A manual lever cutter, or an old guillotine nobody wants to reprogram.
    With the right equipment
    A programmable guillotine with a clamp and a backgauge that moves itself. Bundle 1 cuts 18.9 inches wide through a 3.15-inch stack; Bundles 2 and 3 move to hydraulic cutters that store the job.

Good to know

Bundles finish what you already print. If you also need the printer itself, we carry digital envelope printers, production printers and duplicators, and can quote them alongside a bundle.

Print Shop Finishing Bundles

Three bundles, sized to how busy the shop is.

Every bundle is delivered, installed on your floor, set up with the jobs you run most, and comes with training for everyone who will use it. Financing is available on all three.

Print Shop Finishing Bundles: the 3 bundles side by side
BundleBundle 1: The Counter ShopBundle 2: The Busy ShopBundle 3: The Production Floor
Machines050506
Floor area33 sq ftStated for 4 of 5 machines, machines only40.3 sq ftStated for 3 of 5 machines, machines only39.6 sq ftStated for 2 of 6 machines, machines only
Heaviest machine550 lbFormax Cut-True 27S1,025 lbDuplo HC-550i992 lbDuplo DC-746
Power
  • Standard 120V outlet
  • 120V, dedicated line
Not stated for 1 of 5
  • Standard 120V outlet
  • 208 to 240V, single phase
Not stated for 1 of 5
  • Standard 120V outlet
  • 208 to 240V, single phase
  • Three phase
Not stated for 3 of 6
Needs an electricianYes, for at least one machineYes, for at least one machineYes, for at least one machine

Space and power are read from each machine's spec sheet, the same figures as the full bundle page. Floor area is the machines alone, before working room around them. Where a spec sheet states nothing, we say so and measure at the site check.

Bundle 1: The Counter Shop

For a copy shop or a new print shop finishing short runs every day.

Built for

One or two people, walk-in work and a steady list of regulars. Cards cut and creased from the sheet, brochures folded, booklets stitched, and a real guillotine for everything else.

Space and power

Floor area
33 sq ftStated for 4 of 5 machines, machines only
Heaviest
550 lbFormax Cut-True 27S
Power
Standard 120V outletDuplo DC-618, Duplo DF-999A and Skandacor Bobcat S15M120V, dedicated lineFormax Cut-True 27SNot stated on the spec sheet for MBM iBooklet.

Warning: Before it arrives

At least one machine in this bundle needs more than a standard wall outlet. Plan for an electrician to add the circuit; we confirm the exact supply at the site check.

The full bundle page shows every machine with its space and power, and can be shared, printed or sent to us for a quote.

In the bundle / 5 machines

  1. Duplo DC-618

    Duplo / Slitter/Cutter/Creaser

    Slitter/cutter/creaser: finished cards and folded pieces from the printed sheet, up to 23 sheets a minute, 110 to 400 gsm

  2. Formax Cut-True 27S

    Formax / Semi-Automatic Electric Guillotine Cutter

    Semi-automatic electric guillotine: 18.9 in cutting width, 3.15 in stack, automatic clamp

  3. Duplo DF-999A

    Duplo / Automatic Tabletop Folder

    Automatic tabletop folder: sets its own fold plates, up to 260 letter sheets a minute, 30 saved jobs

  4. MBM iBooklet

    MBM / Tabletop Booklet Maker

    Tabletop booklet maker: staples and folds up to 16 sheets a set, up to 800 booklets an hour

  5. Skandacor Bobcat S15M

    Skandacor / Compact Laminator & SLEEKpro Foiler

    Compact roll laminator, 15 in wide, one or two sided, with digital foiling over toner

Included with this bundle

  • Delivery and on-site installation
  • Jobs saved for the pieces you run most
  • Training for everyone who will use it
  • First preventive-maintenance visit

Bundle 2: The Busy Shop

For a quick printer with jobs on the board every day and customers who wait.

Built for

A few people and a digital press that rarely stops. A hydraulic cutter that stores the job, a faster slitter/cutter/creaser, a suction-fed folder for coated stock, a booklet system with its own sheet feeder, and coating, foil and lamination in one machine.

Space and power

Floor area
40.3 sq ftStated for 3 of 5 machines, machines only
Heaviest
1,025 lbDuplo HC-550i
Power
Standard 120V outletDuplo DC-648, Duplo DF-1300L and Duplo DFL-500208 to 240V, single phaseDuplo HC-550iNot stated on the spec sheet for Duplo 150 Digital Booklet System.

Warning: Before it arrives

At least one machine in this bundle needs more than a standard wall outlet. Plan for an electrician to add the circuit; we confirm the exact supply at the site check.

The full bundle page shows every machine with its space and power, and can be shared, printed or sent to us for a quote.

In the bundle / 5 machines

  1. Duplo DC-648

    Duplo / Slitter/Cutter/Creaser

    Slitter/cutter/creaser: up to 40 sheets a minute, up to 8 slits, 30 cuts and 20 creases a sheet

  2. Duplo HC-550i

    Duplo / Hydraulic Cutter

    Hydraulic cutter: 21.65 in cutting width, touchscreen, up to 999 stored jobs

  3. Duplo DF-1300L

    Duplo / Paper Folder

    Suction-fed folder: up to 310 letter sheets a minute, coated and uncoated stock

  4. Duplo 150 Digital Booklet System

    Duplo / Digital Booklet System

    Sheet feeder and booklet maker: up to 25 sheets a booklet, covers to 300 gsm, up to 1,720 sets an hour

  5. Duplo DFL-500

    Duplo / Dry Coat/Foil/Laminator

    Dry coat, toner foil and thermal lamination in one unit, up to 15 sheets a minute

Included with this bundle

  • Everything in Bundle 1
  • Job files set up from your most common sheet layouts
  • Operator training on the production schedule you actually run

Bundle 3: The Production Floor

For a commercial print shop running finishing most of the day.

Built for

Long runs, repeat work and more than one operator. A 30.5-inch hydraulic cutter, the fastest slitter/cutter/creaser, a creaser and folder for heavy covers, a continuous-feed floor folder, a booklet system with a trimmer, and a foil and laminating line.

Space and power

Floor area
39.6 sq ftStated for 2 of 6 machines, machines only
Heaviest
992 lbDuplo DC-746
Power
Standard 120V outletDuplo DC-746208 to 240V, single phaseDuplo DFL-700Three phaseBaum 20 CFFNot stated on the spec sheet for Challenge Champion 305 TC, Duplo CF375 XPRO and Duplo 700i Digital Booklet System.

Warning: Before it arrives

At least one machine in this bundle needs more than a standard wall outlet. Plan for an electrician to add the circuit; we confirm the exact supply at the site check.

The full bundle page shows every machine with its space and power, and can be shared, printed or sent to us for a quote.

In the bundle / 6 machines

  1. Challenge Champion 305 TC

    Challenge / Paper Cutter

    Hydraulic paper cutter: 30.5 in cutting width, color touchscreen, programmable

  2. Duplo DC-746

    Duplo / Slitter/Cutter/Creaser

    Slitter/cutter/creaser: up to 50 sheets a minute, up to 10 slits a sheet

  3. Duplo CF375 XPRO

    Duplo / Creaser & Folder

    Creaser and folder: creases and folds 80 to 400 gsm in one pass, up to 6,000 sheets an hour

  4. Baum 20 CFF

    Baum / Continuous Feed Floor Folder

    Continuous-feed floor folder: load without stopping, sheets up to 20.5 x 33 in

  5. Duplo 700i Digital Booklet System

    Duplo / Digital Booklet System

    Sheet feeder, booklet maker and trimmer: 2 to 30 sheets a booklet, up to 3,272 booklets an hour

  6. Duplo DFL-700

    Duplo / Foil/Laminator

    Foil and laminator: foiling up to 40 sheets a minute, laminating up to 20

Included with this bundle

  • Everything in Bundle 2
  • Floor layout planned with you before delivery, power and space checked against each spec sheet
  • Operator training for every shift

Bundles are starting points. We test your own printed sheets before we quote the exact configuration: in our Miami showroom where the machine is on the floor, or at the manufacturer for the larger machines. Want to mix your own? Build your line picks the machines from the work you do.

Estimate a monthly payment, opens in a new tab

The full lineup behind these bundles

Not sure which machines fit? Pick the work you want to offer and the builder lines them up, sized for your volume. Build your line

Section 179: equipment in service by Dec 31 may be deductible this tax year.Details

Why PressTech

A dealer that installs it and comes back to service it.

  • Installed, trained and serviced by us

    We deliver, level, connect and set up each machine on your floor, save your jobs and train your operators. When a machine needs attention, one of our own technicians comes to your shop.

  • Sized to your work, not to a catalog

    We start from the jobs on your board and the stock you run, and we show you the next size up for each machine so you can see the path before you need it.

  • A local dealer you can call

    PressTech is a fourth-generation family business in Miami with more than 30 years in print finishing, serving shops across South Florida.

  • One dealer for the whole line

    Cutting, creasing, folding, binding and laminating from the brands we are authorized to sell, plus the supplies and parts that keep them running.

How It Works

See it run on your kind of work before you buy.

  1. Step 1: A short call

    Tell us what you print, on what stock, how many a week, and what you send out today. We size the bundle to that.

  2. Step 2: A demo that fits the machine

    The smaller machines we can show you in our Miami showroom. The large ones are too big to keep on a showroom floor, so we demonstrate them by live video, and your own printed sheets can be sent to the manufacturer to be run on that exact machine. Either way you see results on your stock before you decide.

  3. Step 3: Install, jobs, training

    If it fits, we deliver, install on your floor, save your jobs and train everyone who will run it.

¿Prefiere hablar en español? Atendemos imprentas y centros de copiado en español en todo el sur de la Florida. Llámenos al 786-916-3713 o pida una demostración gratuita, en nuestro showroom de Miami o por video.

Questions Print Shop Owners Ask Us

I already have a guillotine. Why would I add a slitter/cutter/creaser?

A guillotine cuts a stack one side at a time, so a sheet of business cards takes a turn and a cut for every row and column. A slitter/cutter/creaser takes single printed sheets from a feeder and slits, cuts and creases each one in one pass, so cards, postcards and folded cards come out finished. You keep the guillotine for trimming stacks, cutting down parent sheets and squaring books. Most shops end up running both.

Will these machines run the stock I print on?

Each machine has a stated paper range on its spec sheet, and the bundles are matched to it: the slitter/cutter/creasers take 110 to 400 gsm (the DC-746 to 350 gsm), the tabletop folder 46.5 to 157 gsm, the Duplo booklet systems covers up to 300 gsm. The honest test is your own job, so we test your printed sheets on your real stock before you decide: in our showroom for the smaller machines, or sent to the manufacturer for the larger ones.

We are small. Can we start with part of a bundle?

Yes. The bundles are starting points, not packages you must take whole. Many shops begin with the slitter/cutter/creaser and a folder and add the booklet maker or the laminator when that work picks up. Build your line shows the next size up for each machine, so you can see where you would go from there.

How much room and what power do the bundles need?

It depends on the bundle. Bundle 1 is the most compact. Bundle 3 includes large floor machines and equipment that needs more than a standard wall outlet. Each bundle on this page lists the floor space and power stated on the spec sheets of its machines, and we check both against your shop before delivery.

Do you install it and train my operators?

Yes. Delivery, installation, job setup and operator training are part of every bundle, done by PressTech. Service after that is from our own technicians, on site in South Florida.

Can we finance a bundle, and does Section 179 apply?

Financing is available on every bundle. For a business, qualifying equipment installed and in service by December 31 may be eligible for a Section 179 deduction in this tax year. Whether it applies to you is a question for your accountant; we can supply the invoice and in-service details they will ask for.

What customers say

  • “We have been working with Presstech for many years and they've never disappointed.”

    A. Hernandez

    ARD Printing Solutions LLC

  • “Presstech has been a life saver for our company many times... they have always come through.”

    Mike Negron

    President

    DynamicDirect.com Inc.

Quote request

Book a Free Demo

Tell us what you print, on what stock and how many a week. We will set up the right demo for the machines you need, in our Miami showroom or by live video, and arrange a test of your own printed sheets.

We call back on this number.

For the written quote.

A model, a kind of machine or the job.

Your volume, the machine you have now, or what it is doing.

Call PressTech at 786-916-3713

Finish it in your own shop.

Free demo, in our showroom or by live video, with a test of your own printed sheets. Buy or finance. Delivery, installation and training included. Local service from a fourth-generation family dealer in Miami.

Call PressTech at 786-916-3713Get a quote

Request a quote

A person at PressTech reads every request and gets back to you.

We call back on this number.

For the written quote.

Where the machine would go.

The job, the volume, or the machine you have now.

Best way to reach youOptional
More detailsOptional: helps us quote faster
When do you need it?Optional
Loading dock or forklift?Optional