
E-COMBO-ELITE Technopack L-Sealer and Shrink Tunnel Combo System
- Speed
- 960 pph
- Operation
- Semiautomatic
PressTech LLC, MiamiServing South FloridaFamily owned
SalesInstallationService and repairRelocationTraining
Pack and ship
L-bar sealers, heat shrink tunnels, combo systems, chamber machines, and sleeve wrappers for retail-ready packaging, sold, installed, and serviced in South Florida.
Every machine sold, installed and serviced by our own team in South Florida.
Shrink wrap line builder
A shrink wrap line is a sealer and a heat tunnel working together. Pick how you pack and see the machines that pair up, what they turn out, and the power they need.
Getting started
A manual sealer and a heat gun. Slide the product into the film, pull the bar to cut and seal, then shrink it by hand.
By hand
no conveyor, no tunnel
We confirm the fit on your largest pack and check your power before you order.
Largest pack
Up to an 18 in or 24 in seal
Output
By hand
No conveyor, no tunnel.
What your electrician needs
A standard wall outlet
Getting started
A chamber system seals and shrinks under one hood. Lower the lid and the pack comes out finished.
300
packs per hour, 450 with the conveyor
We confirm the fit on your largest pack and check your power before you order.
Largest pack
Up to 19.7 x 13.8 x 7.9 in
Output
300 packs per hour
The small dots are the other setups on this page.
What your electrician needs
One 220V single-phase circuit
Sealer and tunnel line
The 19 x 17 in L-bar sealer feeding the 9 x 15 in tunnel. The only pair in the line that needs no 3-phase power.
780
packs per hour
We confirm the fit on your largest pack and check your power before you order.
Two machines, in line
Largest pack
Up to 14.5 in wide, 7.9 in tall
Output
780 packs per hour
The small dots are the other setups on this page.
What your electrician needs
220V single-phase for both machines
Sealer and tunnel line
The same L-bar sealer with the 12 in tall tunnel, for product that will not clear the 9 in opening.
780
packs per hour
We confirm the fit on your largest pack and check your power before you order.
Two machines, in line
Largest pack
Up to 14.5 in wide, 12 in tall
Output
780 packs per hour
The small dots are the other setups on this page.
What your electrician needs
Single-phase for the sealer, 3-phase for the tunnel
Sealer and tunnel line
The 30 x 21 in L-bar sealer with the wide 25.5 in tunnel, for work that will not fit a 19 in sealer.
Sized to you
output depends on the product
We confirm the fit on your largest pack and check your power before you order.
Two machines, in line
Largest pack
Up to 22 in wide, 12 in tall
Output
Sized to you
Output depends on the product.
What your electrician needs
Single-phase for the sealer, 3-phase for the tunnel
Built for volume
A pneumatic L-sealer and a tunnel built together, so the pack is sealed and shrunk in a single pass.
960
packs per hour
We confirm the fit on your largest pack and check your power before you order.
Largest pack
Up to 21 x 15 x 9 in
Output
960 packs per hour
The small dots are the other setups on this page.
What your electrician needs
220V 3-phase and shop air
Built for volume
An automatic L-bar sealer feeding the production tunnel. Product goes in on the conveyor and comes out wrapped.
1,500
packs per hour
We confirm the fit on your largest pack and check your power before you order.
Two machines, in line
Largest pack
Up to 16.9 in wide, 9 in tall
Output
1,500 packs per hour
The small dots are the other setups on this page.
What your electrician needs
Single-phase and shop air for the sealer, 3-phase for the tunnel
Bundling
A sleeve wrapper bands the multipack in film and the mesh-belt tunnel shrinks it into one tight bundle.
720
packs per hour (12 a minute)
We confirm the fit on your largest pack and check your power before you order.
Two machines, in line
Largest pack
Bundles up to 12.6 in long, 13.8 in tall
Output
720 packs per hour
The small dots are the other setups on this page.
What your electrician needs
Single-phase and shop air for the wrapper, 3-phase for the tunnel
Shrink Wrap Systems
Filter by brand, the power your building has and whether it sits on a table or the floor. Tick up to four to compare side by side.
22machines











450 mmmax roll width

600 mmmax roll width



380 mmconveyor width

380 mmconveyor width

380 mmconveyor width

540 mmconveyor width

540 mmconveyor width


30 cmconveyor width

30 cmconveyor width
Same job
Most shops run these machines side by side. Each list has its own filters and comparison.
Quote request
Tell us about your volume and workflow and we'll recommend the right shrink wrap systems option, with pricing and financing.