Request a QuoteSkandacor LAMpro Puma D28M 28" Hot Roll Laminator
Model: 1S29D72M
The LAMpro Puma D28M is a 28 inch hot roll laminator and mounter for small-format print finishing on a standard 115 V outlet. Large rubber nip rollers encapsulate duplex laminate up to 5 mil on media up to 13 mm thick, built-in side slitters trim the output, and a take-up roller supports limited SLEEKpro foiling, scrap rewinding, and cold PSpro liner take-up. Stand and casters are included on the 176 lb unit.
Request a Quote
Specifications
| Max Laminating Width | 28" |
|---|---|
| Media Thickness | Up to 13 mm |
| Laminating Film | Up to 5 mil |
| Speed | Up to 11.8 ft/min (depending on laminate and substrate) |
| Temperature Control | 0 - 150 C (heated rubber nip rollers, 4 rollers) |
| Warm-Up Time | 8 minutes |
| Extras | Side slitters; take-up roller for limited SLEEKpro foiling and liner rewind |
| Electrical | AC 115 V |
| Dimensions / Weight | 41x18x11" (machine), 176 lb; stand with casters included |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Runs on a standard 115 V outlet.
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
Skandacor
Skandacor LAMpro Panther D47HR 47" Wide-Format Laminator
The LAMpro Panther D47HR is a 47 inch hot roll laminator and mounter for wide-format print finishing. Large rubber nip rollers encapsulate media up to 13 mm thick, side slitters trim the laminated output, and a rear cross cutter with foot pedal handles sheet separation. A take-up roller rewinds slit scrap during encapsulation or the liner during cold PSpro lamination, and the stand with casters is included.
View Details
Skandacor
Skandacor LAMpro Bobcat S15M Compact Laminator & SLEEKpro Foiler
The LAMpro Bobcat S15M is a 15 inch hot roll laminator with a heated chrome roller, making it one of the most capable compact machines for SLEEKpro digital foiling and single-sided lamination with thin films. It runs films from 1.0 to 5.0 mil at up to 15 ft/min, handles 120-400 gsm stocks, and includes a decurler bar, perforator for manual sheet separation, and a take-up roller for foil or liner rewinding. At 122 lb on a standard 115 V outlet, it fits on-demand print shops, schools, and offices.
View Details
Martin Yale
Martin Yale Dry Lam HLA-2301 Automatic Laminator
The Dry Lam HLA-2301 is a fully automatic desktop laminator built for professional environments where speed and consistency matter. It feeds up to 200 sheets automatically, laminates single or double sided at 68 inches per minute, and trims each piece with flush cut or border cut modes. A mobile cart, telescoping catch tray, and waste bin are included.
View Details
CutWorx
CutWorx CWT 1016 Advantage Flatbed Applicator Table
The CWT 1016 Advantage is the smallest CWT applicator table, giving sign shops a 4'5" x 3'1" working area for laminating, transfer-taping, and mounting yard signs, posters, and street signs. Like all CWT flatbed applicators it positions material precisely for far less waste than a roll laminator, and most operators are productive within an hour. It arrives fully assembled - roll it out of the crate and into the shop.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative