Request a QuoteSkandacor LAMpro Tiger T22W Roll-to-Sheet Industrial Laminator
Model: 1S11TT2W
The LAMpro Tiger T22W is a roll-fed industrial laminator, cutter, and re-stacker that runs at up to 65 m/min (about 213 ft/min) - an order of magnitude faster than sheet-fed machines. Three supply mandrels laminate printed top and bottom webs to a core material up to 488 gsm with optical-eye alignment, dual induction and infrared heating, and a flying guillotine that sheets output up to 27 inches long into a 19 inch stacker. Built for thick cards, flexible packaging, and book covers.
Request a Quote
Specifications
| Speed | Up to 65 m/min (~213 ft/min, depending on application) |
|---|---|
| Max Laminating Width | 20" |
| Output Sheet Size | 13x19" min to 27x20" max (sheet or roll output; rewinder sold separately) |
| Stock Weight | 130 - 488 gsm (26 pt) |
| Film Thickness | 1.2 - 10 mil (nylon, polyester, polypropylene) |
| Roll Capacity | Top/bottom rolls 14.5"; core material 21.6" (3" expanding air shafts) |
| Heating | Dual induction and infrared; 10 minute warm-up |
| Sheeting | Flying guillotine with 19" output stacker |
| Electrical | 380 V, 50 A, 3 Phase |
| Dimensions / Weight | 146x55x63" including stacker, 3,915 lb |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Requires a 380 V, 50 A three-phase supply. Floor machine at 3,915 lb - confirm rigging and floor load.
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
Skandacor
Skandacor LAMpro Jaguar D30 High-Speed Duplex Laminator
The LAMpro Jaguar D30 brings the Jaguar duplex platform to a 30 inch web, running encapsulation and double-sided lamination at up to 49 ft/min with a side-lay registration table for precise hand feeding. Air-shaft mandrels make film changeovers fast, preheat and heated nip rollers boost adhesion to digital prints, and side slitters with scrap take-up reels plus six banks of cooling fans condition the web before offline sheeting.
View Details
Skandacor
Skandacor Bagel Falcon B1 Fully Automatic Industrial Laminator
The Bagel Falcon B1 is Skandacor's flagship industrial laminator, running B1 sheets up to 29.5x41.3 inches at up to 115 ft/min - 4,140 20x28 sheets per hour. Pallet loading and unloading with a 31.5 inch, 1,102 lb feeder pile minimizes downtime, a thermal-oil sealed heating roller and double mechanical decurling bar keep output flat, and high-speed bursting separates sheets automatically. Options include a SLEEKpro foil module, double film changer, and crane film-loading assist.
View Details
Skandacor
Skandacor LAMpro Lion 22A Simplex/Duplex Laminator & SLEEKpro
The LAMpro Lion 22A does every type of lamination on one machine: duplex encapsulation, thin-gauge duplex, single-sided lamination, and SLEEKpro digital foiling - including foil over raised UV. A dual heated nip system improves adhesion to digital prints, the automated feeder holds a 13.7 inch pile, and a flying knife separates single-sided output at up to 49 ft/min (duplex runs to 40 ft/min). Card manufacturers and commercial shops get one 1,261 lb platform instead of three machines.
View Details
CutWorx
CutWorx CWT 1016 Advantage Flatbed Applicator Table
The CWT 1016 Advantage is the smallest CWT applicator table, giving sign shops a 4'5" x 3'1" working area for laminating, transfer-taping, and mounting yard signs, posters, and street signs. Like all CWT flatbed applicators it positions material precisely for far less waste than a roll laminator, and most operators are productive within an hour. It arrives fully assembled - roll it out of the crate and into the shop.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative