Skip to content

On-site repair / South Florida

Shrink Wrap and Packaging Machine Repair

Mon-Fri. Emergency service available.

Hablamos español

Common Problems We Fix

  • Sealer won't cut the film cleanly
  • Seal wire keeps burning out
  • Tunnel not heating or heating unevenly
  • Film wrinkles, holes, or dog ears
  • Conveyor stopped or slipping
  • Temperature controller error
  • Case sealer tape not cutting or sticking
  • Strapper won't feed, tension, or seal

If your machine is doing any of these, call us. Not on the list? Tell us what it's doing and we'll schedule a visit.

We come to your shop

Packaging Equipment: what we repair

When the sealer stops cutting or the tunnel stops shrinking, finished product stacks up with nowhere to go. We repair shrink wrap and end-of-line packaging machines on-site: seal wires and PTFE, heating elements, temperature controllers, conveyors, pneumatics, and tape and strap heads. As an authorized Technopack reseller we get JORESTECH parts from the source.

  • We come to your shop
  • Miami / Fort Lauderdale / West Palm / Naples / Fort Myers
Technopack shrink wrap system with L-bar sealer and heat tunnel

Packaging Equipment

Brands We Service

We also service

JORESTECH L-bar sealers and shrink tunnelsChamber shrink systemsCase sealers and case erectorsStrapping and banding machinesPallet stretch wrappersContinuous band sealersChamber vacuum sealers

Good to know

We service shrink wrapping, case sealing, strapping, stretch wrapping, and bag and vacuum sealing machines. We do not service filling lines, form-fill-seal machines, labelers, or industrial inkjet and laser coders. Have a different brand of sealer or tunnel? Tell us the make and model and we will say right away whether we can help.

Step by step

How a Service Call Works

  1. Call or send the form with the make, model, and what the machine is doing.
  2. We schedule an on-site visit around your production.
  3. The technician diagnoses, quotes, and repairs.
A PressTech technician troubleshooting the control panel of a print finishing machine.
A PressTech technician at a machine's control panel, on site.

What South Florida Shops Say

  • “Presstech has been a life saver for our company many times... they have always come through.”

    Mike Negron

    President, DynamicDirect.com Inc.

  • “Over these many years you have handled all my requests from repairs, supplies, sales of equipment... at a fair and competitive price.”

    Dan M.

    Baptist Health South Florida, In-House Print Shop

Questions

Common Questions

Do you repair machines that were bought somewhere else?

Yes. Many JORESTECH and Technopack machines in South Florida were bought online and set up by the owner. We repair them on-site whether or not you bought from us.

My shrink tunnel runs but the film will not shrink right. Is that a repair?

Often it is a settings problem rather than a failed part: tunnel temperature, conveyor speed, seal time, and film type all have to match the product. We check the heating elements and controller first, then dial the machine in on your actual pack.

Can you get parts?

Yes. We are an authorized Technopack reseller, so seal wires, PTFE tape, heating elements, controllers, belts, and other JORESTECH parts come from the distributor in Sunrise, Florida.

Do you install new packaging equipment?

Yes. We sell Technopack shrink wrap systems, case sealers, strappers, and wrappers, and we deliver, set up, and train your operators. Most of the shrink line runs on 220V, so we confirm power and compressed air at your site before the order.

Quote request

Request a Repair Visit

Tell us the make, model, and what it's doing. We'll call you back to schedule a visit.

We call back on this number.

For the written quote.

A model, a kind of machine or the job.

Your volume, the machine you have now, or what it is doing.

Call PressTech at 786-916-3713

After the repair

Stop paying for the same breakdown twice.

A preventive maintenance plan puts packaging equipment on a schedule: cleaning, calibration, wear-part checks, and priority scheduling when something does go wrong.

Call PressTech at 786-916-3713Get a quote

Request a quote

A person at PressTech reads every request and gets back to you.

We call back on this number.

For the written quote.

Where the machine would go.

The job, the volume, or the machine you have now.

Best way to reach youOptional
More detailsOptional: helps us quote faster
When do you need it?Optional
Loading dock or forklift?Optional