Request a QuoteSkandacor proLINE T22 Max Trimmer with Vibrating Exit Table
Model: 3S11PT22M
The proLINE T22 Max is the fully featured version of the 22 inch proLINE trimmer, adding a fiber-optic mark mode for up to 10 registered cuts per sheet, waste trim fans, an ionizing exit fan, a rolling waste bin, and an integrated vibrating/jogging exit table that squares output as it stacks. It sheets laminated webs at 118 ft/min - about 3,700 12x18 sheets per hour - with PLC touchscreen control and dancer-bar web tension on a 230 V circuit.
Request a Quote
Specifications
| Max Web Width | 22" |
|---|---|
| Max Roller Speed | 118 ft/min |
| Throughput | 3,700 12x18" sheets/hr (portrait trim mode) |
| Max Stock Thickness | 0.8 mm |
| Cutting Modes | Trim, sheet, and fiber-optic mark mode (up to 10 cuts/sheet) |
| Waste Handling | Waste trim fans, ionizing exit fan, rolling removable bin |
| Exit Table | Integrated vibration/jogging system (included) |
| Electrical | 230 V, 22 A, Single Phase |
| Dimensions / Weight | 68x58x39" incl. exit table, 441 lb |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Requires a 230 V, 22 A single-phase circuit.
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
Skandacor
Skandacor proLINE T22 Industrial Trimmer
The proLINE T22 is a high-speed industrial trimmer that sheets and trims laminated webs up to 22 inches wide at 118 ft/min - about 3,700 12x18 sheets per hour in portrait trim mode. A PLC color touchscreen configures trim and sheet modes, a dancer bar keeps web tension stable for continuous production, and the auxiliary exit table is included. It runs on 110 V, making it an easy add behind any duplex laminator.
View Details
Skandacor
Skandacor proLINE T32 Max Trimmer with Vibrating Exit Table
The proLINE T32 Max is the flagship of the proLINE trimmer series: a 32 inch web trimmer with fiber-optic mark mode for up to 10 registered cuts per sheet, waste trim fans, an ionizing exit fan, a rolling waste bin, and an integrated vibrating exit table that jogs sheets square as they stack. It runs laminated webs at 118 ft/min - about 3,500 12x18 sheets per hour - with PLC touchscreen control on a 230 V circuit.
View Details
Skandacor
Skandacor LAMpro Cheetah S15 Single Side Laminator
The LAMpro Cheetah S15 is a compact single-sided laminator and specialty finishing system designed for on-demand print shops. Its semi-automatic feeder suits short runs, while the flying knife separator cleanly cuts tough films like nylon and thin PET at speeds up to 39 ft/min. It also supports SLEEKpro finishing for variable data foil stamping, spot varnish, and holographic effects.
View Details
Challenge
Challenge CHAMP 150 Hydraulic Paper Cutter
The Challenge CHAMP 150 is billed by the manufacturer as the strongest 15" paper cutter on the market: full hydraulic power drives both the clamp and the knife with up to 2,350 lbs of pressure, ideal for high volumes and thick stocks in small formats. Its narrow welded-steel frame rolls through a 29" doorway, and it plugs into a standard 120 V, 20 A outlet. Made in the USA.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative