Request a QuoteChallenge CMT 330TC Three-Knife Book Trimmer
Model: CMT-330TC
The Challenge CMT 330TC is a fully automated three-knife trimmer for perfect-bound books, cutting up to 2" thick blocks and finishing landscape formats up to 12.1x12.9". Digital servo setup changes book sizes in under 6 seconds with no tools, the integrated barcode reader enables true book-of-one production, and multi-book mode pushes throughput to 750 books per hour. Its exclusive simultaneous in-line and near-line feeding lets it trim from a perfect binder and a hand-loaded pile feeder at the same time. Made in Michigan, USA.
Request a Quote
Specifications
| Maximum starting book size | 13x13" (spine x width) |
|---|---|
| Finished book size | 5.82x3.94" min to 12.1x12.9" max — includes landscape formats |
| Book thickness | Up to 2" / 51 mm |
| Throughput | Up to 750 books/hour in multi-book mode (up to 3 books at once) |
| Size changeover | Under 6 seconds, fully digital, no tools or clamp boards |
| Control | 10.5" color touch screen, automatic book size detection, integrated barcode reader, 99 job memory |
| Configurations | Off-line hand-feed, near-line with pile feeder and vertical stacker, or in-line behind any perfect binder |
| Maximum trim (top) | 6" / 152 mm |
| Power | 208/230 V 3-phase, 20 A (50 Hz options available) |
| Compressed air | 9 CFM at 90 PSI, dry non-lubricated (ISO 8573.1 Class 2.4.2) |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Requires 208/230 V 3-phase power (20 A, 30 A service) and a constant supply of dry, non-lubricated compressed air (9 CFM at 90 PSI minimum, ISO 8573.1 Class 2.4.2 quality — warranty is voided without it).
Delivery & lead time
Ships on 3-5 skids depending on configuration; near-line system approx. 3,660 lbs net.
Related Machines
Challenge
Challenge CMT 130TC On-Demand Book Trimmer
The Challenge CMT 130TC trims perfect-bound books up to 2" thick with a single knife and automated book rotation, replacing slow, error-prone guillotine trimming for on-demand book work. Automatic size detection and barcode reading make changeovers fully automated in about 10 seconds, and its industry-exclusive modular design grows with you — start as a hand-fed off-line trimmer, then add a 35.5" pile feeder, vertical stacker, or in-line conveyor to run directly behind your perfect binder. Made in Michigan, USA.
View Details
Challenge
Challenge Champion 370 TC Paper Cutter
The Challenge Champion 370 TC brings 37 inch hydraulic cutting capacity to demanding production floors, with up to 7,000 lbs of clamping force and accuracy within plus or minus 0.002 inch. The 10.5 inch color touch screen TC controller offers graphical program layout, auto sheet division, and .csv offline programming. Built in the USA with a solid stainless steel table, light beam curtain safety, and UL, cUL, and CE certification.
View Details
Challenge
Challenge iCutter Series Heavy-Duty Paper Cutters
The Challenge iCutter series covers large-format guillotine cutting from 26.7" up to a full 62" width, with mechanical-drive power, backgauge accuracy of +/- 0.002", and clamp pressure adjustable up to 9,921 lbs on the larger frames. A 15" color touchscreen handles job storage, diagnostics, and maintenance reminders, an optional iCUTTER interface adds CIP/JDF workflow integration (HP SmartStream partner), and an infrared safety light curtain protects the operator. This is the machine for commercial binderies cutting big sheets all day.
View Details
Duplo
Duplo 150 Booklet System
The Duplo 150 Booklet System is the entry point to professional in-house bookletmaking: a heavy-duty DSC-10/60i air-suction collator feeding the compact DBM-150 bookletmaker and DBM-150T face trimmer. It collates flat offset or digital sheets and delivers saddle-stitched, folded, and trimmed booklets up to 25 sheets at up to 2,400 sets per hour — manuals, catalogs, reports, and CD-size collateral, all off-line so one system can finish output from multiple presses.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative