Request a QuoteChallenge CMT 130TC On-Demand Book Trimmer
Model: CMT-130TC
The Challenge CMT 130TC trims perfect-bound books up to 2" thick with a single knife and automated book rotation, replacing slow, error-prone guillotine trimming for on-demand book work. Automatic size detection and barcode reading make changeovers fully automated in about 10 seconds, and its industry-exclusive modular design grows with you — start as a hand-fed off-line trimmer, then add a 35.5" pile feeder, vertical stacker, or in-line conveyor to run directly behind your perfect binder. Made in Michigan, USA.
Request a Quote
Specifications
| Maximum starting book size | 13x9.5" (spine x width) |
|---|---|
| Finished book size | 5.82x4" min to 12x9" max |
| Book thickness | Up to 2" / 51 mm |
| Throughput | Up to 200 books/hour single-book, up to 500 books/hour in optional multi-book mode |
| Size changeover | Approx. 10 seconds, fully automated, no tools required |
| Control | 10.5" color touch screen with live book tracking, automatic size detection, barcode reader, 99 job memory |
| Configurations | Off-line, near-line (pile feeder + vertical stacker), or in-line with any perfect binder |
| Footprint (base machine) | 52" W x 57" L x 62" H, 1,500 lbs |
| Power | 208/230 V 3-phase, 20 A (50 Hz options available) |
| Compressed air | 5 CFM at 90 PSI, dry non-lubricated (ISO 8573.1 Class 2.4.2) |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Requires 208/230 V 3-phase power (20 A, 30 A service) and dry, non-lubricated compressed air at a constant 90 PSI, 5 CFM minimum (ISO 8573.1 Class 2.4.2 quality — warranty is voided without it).
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
Challenge
Challenge CMT 330TC Three-Knife Book Trimmer
The Challenge CMT 330TC is a fully automated three-knife trimmer for perfect-bound books, cutting up to 2" thick blocks and finishing landscape formats up to 12.1x12.9". Digital servo setup changes book sizes in under 6 seconds with no tools, the integrated barcode reader enables true book-of-one production, and multi-book mode pushes throughput to 750 books per hour. Its exclusive simultaneous in-line and near-line feeding lets it trim from a perfect binder and a hand-loaded pile feeder at the same time. Made in Michigan, USA.
View Details
Challenge
Challenge Champion 305 TC Paper Cutter
The Challenge Champion 305 TC is a USA made 30.5 inch programmable hydraulic paper cutter built for one to two shift production environments. It pairs powerful hydraulic clamping and cutting, accurate to within plus or minus 0.002 inch, with a 10.5 inch color touch screen TC controller and a rust free solid 1 inch thick stainless steel table. Light beam curtain safety, two hand timed cut activation, and UL, cUL, and CE certification make it one of the safest cutters in its class.
View Details
Challenge
Challenge Titan 265 TC Programmable Paper Cutter
The Challenge Titan 265 TC is a 26-1/2" hydraulic programmable cutter built on cast iron and steel, delivering up to 26 cuts per minute with up to 4,000 lbs of electronically controlled clamp force. The 10.5" color touch-screen TC controller stores unlimited programs, reads .csv job files from a USB drive, and automates sheet-division and label work — a true production cutter for digital and offset shops stepping up from a 20" class machine.
View Details
Duplo
Duplo 150 Booklet System
The Duplo 150 Booklet System is the entry point to professional in-house bookletmaking: a heavy-duty DSC-10/60i air-suction collator feeding the compact DBM-150 bookletmaker and DBM-150T face trimmer. It collates flat offset or digital sheets and delivers saddle-stitched, folded, and trimmed booklets up to 25 sheets at up to 2,400 sets per hour — manuals, catalogs, reports, and CD-size collateral, all off-line so one system can finish output from multiple presses.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative