Skip to content

Shrink Wrap Systems

Technopack E-AS-550 Semi-Automatic Sleeve Wrapper

Technopack E-AS-550 Semi-Automatic Sleeve Wrapper, manufacturer photo
Overall 36.22 x 40.94 x 74.8 in, per the spec sheet
Speed
12 ppm
Operation
Semiautomatic
Max Roll Width
550 mm / 21.65 in
Compressed Air Requirement
71-99 PSI
All 9 specifications

Space and power

Size
36.22 x 40.94 x 74.8 in
Power
208 to 240V, single phase

The spec sheet does not state the weight plainly. We confirm it during the pre-install site survey.

Site requirements and delivery

Technopack / Shrink Wrap Systems

About the E-AS-550

The E-AS-550 is a semi-automatic sleeve wrapper for bundling: it wraps a band of polyethylene film around cans, bottles, cartons, or stacked product at about 12 packs per minute, ready for a shrink tunnel. It uses film rolls up to 21.65 in wide and needs single-phase 220V plus shop air at 71 to 99 PSI. PressTech delivers it, sets it up, dials in the settings on your product, and trains your operators.

Good to know before you buy

Site
Power: 220 V, 50-60 Hz, 1.5 kW / 1 Ph/ 8A, hardwired connection (no plug supplied). Compressed air: 71-99 PSI. We confirm power and air at your site before the order.
Power
208 to 240V, single phase. The spec sheet says: 220 V, 50-60 Hz

Technopack E-AS-550

Specifications

Checked against technopackcorp.com and proxy.technopackcorp.com on 2026-11-11.

Technopack E-AS-550 Semi-Automatic Sleeve Wrapper specifications, 9 rows
Ref.ParameterValue
S-01OperationSemiautomatic
S-02Max Roll Width550 mm / 21.65 in
S-03Speed12 ppm
S-04Compressed Air Requirement71-99 PSI
S-05Plug TypeBare wire
S-06Voltage220 V, 50-60 Hz
S-07Power1.5 kW / 1 Ph/ 8A
S-08Machine Dimensions92 x 104 x 190 cm / 36.22 x 40.94 x 74.8 in
S-09Shipping Weight221 kg / 487 lbs

From the spec sheet

Space and power

Will it fit, and can your power take it. Figures from the spec sheet; the rest is confirmed on site.

No floor plan for this machine

The spec sheet gives the size as 36.22 x 40.94 x 74.8 in without saying which side is the width and which the depth, so we do not draw it. The site survey confirms the footprint.
Size
36.22 x 40.94 x 74.8 inSpec sheet, Machine Dimensions: 92 x 104 x 190 cm / 36.22 x 40.94 x 74.8 in
Shipping weight
487 lb
Power
208 to 240V, single phaseSpec sheet, Voltage: 220 V, 50-60 Hz

Not stated plainly on the spec sheet: weight. Confirmed on the pre-install site survey.

Family owned / 4th generation / Miami

Sold, installed, and serviced by PressTech in South Florida

You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.

  • Delivery & Install

    We coordinate freight, rigging, placement, and full setup.

  • Operator Training

    Hands-on training on your jobs, included with installation.

  • Warranty Support

    Manufacturer warranty backed by a local dealer.

  • On-Site Service

    Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.

What installation includes

  • Delivery coordination and placement in your shop
  • Uncrating, setup, calibration, and test runs on your stock
  • Operator training for your team
  • Warranty support and ongoing on-site service
Installation, training, service and repair
PressTech technician installing a finishing machine at a customer's print shop
PressTech technician training a customer's team on a Duplo finishing system

Get a price for the E-AS-550

Every machine is quoted, and we confirm current availability with your quote.

Supplies for this machine

Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.

Browse supplies
Call PressTech at 786-916-3713Get a quote

Request a quote

A person at PressTech reads every request and gets back to you.

We call back on this number.

For the written quote.

Where the machine would go.

The job, the volume, or the machine you have now.

Best way to reach youOptional
More detailsOptional: helps us quote faster
When do you need it?Optional
Loading dock or forklift?Optional