Request a QuoteMBM Triumph 4815 Semi-Automatic Cutter
Model: CU0418
The Triumph 4815 is a floor-standing semi-automatic cutter with electric blade drive, an 18 5/8" cutting width, and a full 3" pile capacity at an ergonomic 37" working height. The spindle-guided back gauge sets by calibrated crank against a front-table digital display (cm or inches), while a manual spindle clamp holds the stack and patented EASY CUT bars enforce two-hand blade activation. A strong step up from tabletop cutters for shops that trim full reams but don't need programmable automation.
Request a Quote
Specifications
| Cutting width | 18 5/8" |
|---|---|
| Cutting height (pile) | 3" |
| Narrow cut | 1" |
| Length behind blade | 18" |
| Clamp type | Manual spindle |
| Blade drive | Electric, with EASY CUT two-hand activation |
| Horsepower | 1 1/2 HP |
| Electrical requirements | 115 V, 60 Hz |
| Dimensions (D x W x H) | 41 1/2" x 30" x 55 1/2" (53" W with side tables) |
| Shipping weight | 531 lbs (552 with side tables) |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
Runs on a standard 115 V outlet.
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
MBM
MBM Triumph 4850 Automatic Cutter
The Triumph 4850 is a fully automatic floor-model paper cutter with an electric blade drive and automatic clamp. It cuts stacks up to 3 inches high across an 18.7 inch width, with low-voltage 24 V controls and an ergonomic 37 inch working height. It is built for steady mid-volume production work.
View Details
MBM
MBM Triumph 4855 Programmable Paper Cutter
The Triumph 4855 is a floor-standing programmable cutter with automatic clamp, power back gauge, and a multilingual digital touchpad that stores 99 programs with up to 99 steps each. It cuts an 18.7" width through a 3.14" pile, positions to 1/10 mm (1/100"), and comes pre-programmed for standard paper sizes with a self-diagnostic system. Patented EASY CUT two-hand activation, an electronically controlled safety guard, and automatic blade return keep operators protected.
View Details
MBM
MBM Triumph 4350 Automatic Tabletop Cutter
The Triumph 4350 is a fully automatic tabletop cutter with electric blade and clamp drive, a 16 7/8" cutting width, and a 1 1/2" pile capacity. Patented EASY CUT activation bars require true two-hand operation, a front-table digital display (cm or inches) positions the spindle-guided back gauge precisely, and an LED optical cutting line shows exactly where the German steel blade will land. Runs on ordinary 115 V power, so it drops into any office or copy-room workflow.
View Details
Challenge
Challenge CHAMP 150 Hydraulic Paper Cutter
The Challenge CHAMP 150 is billed by the manufacturer as the strongest 15" paper cutter on the market: full hydraulic power drives both the clamp and the knife with up to 2,350 lbs of pressure, ideal for high volumes and thick stocks in small formats. Its narrow welded-steel frame rolls through a 29" doorway, and it plugs into a standard 120 V, 20 A outlet. Made in the USA.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative