Request a QuoteChallenge Paddy Wagon Padding Press
Model: PADDY-WAGON
The Challenge Paddy Wagon is the original patented rolling padding press: tilt it back and its 30-degree table slant gravity-aligns up to 15,000 letter-size sheets of 20# bond, clamp the load in seconds, then tilt upright and pad. Built-in shelves hold glue and tools and catch drips, and heavy-duty casters roll the whole press to the cutter or out of the way to dry. Made in the USA.
Request a Quote
Specifications
| Capacity | 15,000 8-1/2x11" sheets of 20# bond (more with smaller sheets) |
|---|---|
| Maximum lift width | 23-1/2" / 60 cm |
| Maximum lift height | 31" / 79 cm |
| Lift depth | 3" to 17"+ |
| Loading | Tilt-back gravity loading with 30-degree table slant, quick-release self-locking clamps |
| Construction | Welded tubular steel, integral storage shelves/spill apron |
| Footprint | 30x30" base, 66-1/2" tall; fits through a 32" doorway |
| Net weight | 100 lbs / 45 kg |
Specifications verified from the manufacturer, last checked 2026-08-21.
Sold, installed, and serviced by PressTech in South Florida
You are not buying from a website. You are buying from a 4th generation family business with technicians who install this machine, train your team on it, and answer the phone when you need service.
Delivery & Install
We coordinate freight, rigging, placement, and full setup.
Operator Training
Hands-on training on your jobs, included with installation.
Warranty Support
Manufacturer warranty backed by a local dealer.
On-Site Service
Repairs and maintenance across Miami-Dade, Broward, and Palm Beach.
Install, Delivery & Shipping
What installation includes
- ✓Delivery coordination and placement in your shop
- ✓Uncrating, setup, calibration, and test runs on your stock
- ✓Operator training for your team
- ✓Warranty support and ongoing on-site service
Site requirements
We confirm power, space, and access requirements during a pre-install site survey, so there are no surprises on delivery day.
Delivery & lead time
Lead times vary by model and configuration; we confirm current availability with your quote. Local delivery across South Florida is handled by our team, with freight and liftgate options where needed.
Related Machines
Challenge
Challenge Handy-Padder Tabletop Padding Press
The Challenge Handy-Padder turns a corner of any workbench into a padding station: its 8-degree slanted table gravity-aligns up to 8,000 letter-size sheets of 20# bond, quick-release clamps lock the load in seconds, and the self-locking swivel table turns so you load, clamp, and pad from one position. All-steel construction with an extended rear stabilizer keeps it planted under a full load. Made in the USA.
View Details
Challenge
Challenge MiniPadder Tabletop Padding Press
The Challenge MiniPadder is a 15 lb all-steel tabletop press for low-volume padding: load up to a 5" stack of sheets as large as 11x17", clamp with the thumb-screw bar, and apply padding compound. Small enough to store in a cabinet between jobs and ship by UPS or FedEx, it is the lowest-cost way to bring notepad production in-house. Made in the USA.
View Details
Challenge
Challenge JF Single-Spindle Paper Drill
The Challenge JF is an industrial-grade single-spindle floor drill that punches through 2" piles with foot-pedal operation, leaving both hands free to handle stock. The auto-trip side guide advances through up to seven backgauge stops automatically for multi-hole patterns, and optional attachments add round cornering, slitting, and slotting to one machine. Made in the USA.
View Details
Challenge
Challenge Combination Series Paper Joggers
Challenge Combination Series joggers are the bindery workhorses for squaring large-format stock ahead of the cutter or folder: table sizes run from 20x26" to 28x40", each handling piles up to 4" high. The table tilts from flat to 60 degrees, accepts accessory dividers for jogging multiple lifts of smaller stock at once, and the Dial-a-Jog control adjusts the jogging action with toggle or hands-free foot-switch operation. Made in the USA.
View DetailsSupplies for this machine
Blades, films, laser materials, and wear parts, matched to your model by the technicians who service it.
Trusted by South Florida’s Print Industry
“We have been working with Presstech for many years and they've never disappointed.”
A. Hernandez
ARD Printing Solutions LLC
“Doron has been our go-to guy for equipment sales & service for over a decade. His expertise and honesty are something rare in this business. I couldn't recommend Presstech enough.”
Jay Orozco
Owner, Creative Creative